EN
VISIP0590 02V/2018: Technical status : 03/08/2018 (subject to adaptions )
SIP PROTECTION, Fabriekstraat 23, B-8850 Ardooie, Belgium
Tel + 32 51 740 800 - +32 51 740 962
http://www.sip-protection.com
–
mailto:
1/4
Ffff aaaaaffff
USER INSTRUCTIONS
0403
Chainsaw protective gloves
PLEASE READ BELOW INSTRUCTIONS CAREFULLY BEFORE WEARING THESE GLOVES
CHECK WITH YOUR SAFETY EGINEER OR YOUR SUPERIOR IF THIS GLOVE IS SUITABLE FOR
YOUR SPECIFIC WORKING ENVIRONMENT .
KEEP THESE INSTRUCTIONS CAREFULLY IN ORDER TO BE ABLE CHECK THOSE ON EACH
MOMENT*
(*) CHECK ON WWW.SIOENAPPAREL.COM IF YOU HAVE THE MOST RECENT VERSION
These gloves meets the requirements of the Personal Protective Equipment (PPE)
EU
European
Regulation 2016/425
.(solidity, safety, innocuousness, comfort). By means of type approval, the glove
has been certified to the European standard
–
EN 381-7:1999
(Chainsaw protective gloves) -
EN 388 :
2016
(Protective gloves against mechanical risks). The PPE also complies with the. Norm
EN
420:2003
(Protective gloves
– General requirements and test methods) .
Protective equipment with reference
2XD2 / 2XD3 / 2SB4 / 2SA4 / 2SA5 / 2SA7 / 2SB5
, will be labeled
with above mentioned norms.
Type-examination has been done by Finnish Institute of Occupational Health , Topeliuksenkatu 41 b,
FI-00250 Helsinki, Finland (NB 0403)
If the number 0403 is shown on the right next to the CE pictogram, it means that it is category III PPE
of a complex design that is to protect the user against hazards which are fatal or which can seriously
and irreparably impair one’s health.. This type of PPE is submitted to an EC-quality guarantee system
of the production with supervision (module C2). The supervision has been entrusted to Finnish
Institute of Occupational Health , Topeliuksenkatu 41 b, FI-00250 Helsinki, Finland (NB 0403).
The EU declaration of conformity can be found at the following Internet address: http://sio.to/eudoc
This PPE is in conformity with the REACH regulation. This PPE contains no elements of which is known
today that they can cause allergic reactions or which are known to be carinogenic or mutagenic .. This
product does not contain any substances at such a level that is known or suspected of having harmful
effects on the hygiene or health or the user within the expected conditions of usage. The design does
not cause any irritation or discomfort to the wearer. This personal protection equipment does not contain
materials that are known to provoke allergic reactions. If allergic reactions should occur, consult a
physician immediately and take contact with the manufacturer.
Chain saw protection
EN 381-7: 1999
Design x , class x
Reference
Design
Protection
Class
Chain speed
(m/s)
2XD2
A
Left hand only
1 (20 m/s)
2XD3
A
Left and right hand
1 (20 m/s)
2SA4
A
Left and right hand
1 (20 m/s)
2SA5
A
Left and right hand
1 (20 m/s)
2SB4
A
Left and right hand
1 (20 m/s)
2SB5
A
Left hand only
1 (20 m/s)
2SA7
A
Left hand only
1 (20 m/s)
