background image

Mounting Instruction BAT-ANT-Protector m-f

Release 03 01/13

Technical Support

https://hirschmann-support.belden.eu.com

Mounting Instruction

Over Voltage Protector
BAT-ANT-Protector m-f

Safety instructions

Only qualified personnel are permitted to install the device in 
accordance with the relevant national installation and safety rules. Its 
usage is only permitted under the conditions stated and shown in this 
instruction.

The data line protector and the equipment connected to it can be 
destroyed by EM surges exceeding the given specification, e.g. due to 
a direct lightning strike.

The operational voltage of the system/equipment to be protected must 
not exceed the maximum permissible operating voltage (rated voltage) 
of the data line protector.

Disconnect or switch off inline equipment when installing or removing 
the protector.

Do not open the protector. Opening the data line protector will void the 
warranty and may result in the accidental destruction of electronic 
components.

 WARNING

ELECTRIC SHOCK OR FALLING

Avoid mounting the antenna near power lines.
When installing an antenna from a ladder or elevating equipment, take 
precautions to avoid falling and ensure the equipment is securely positioned 
on solid ground.

Failure to follow these instructions can result in death, serious injury, 
or equipment damage.

Reviews: