1
LT0638 Iss 1.1 7/2017
READ AND SAVE THESE INSTRUCTIONS
- Follow the instructions in this installation
manual. These instructions must be followed to avoid damage to this product and
associated equipment. Product operation and reliability depend upon proper installation.
DO NOT INSTALL ANY SIMPLEX PRODUCT THAT APPEARS DAMAGED
- Upon
unpacking your Simplex product, inspect the contents of the carton for shipping damage.
If damage is apparent, immediately file a claim with the carrier and notify an authorised
Simplex product supplier.
ELECTRICAL HAZARD
- Disconnect electrical field power when making any internal
adjustments or repairs. All repairs should be performed by a representative or authorised
agent of your local Simplex product supplier.
STATIC HAZARD
- Static electricity can damage components. Handle as follows:
• Ground yourself before opening or installing components
• Prior to installation, keep components wrapped in anti-static material at all times
SYSTEM REACCEPTANCE TEST AFTER SOFTWARE CHANGES
-
To ensure proper
system operation, this product must be tested in accordance with AS1670.1, after any
programming operation or change in site-specific software. Reacceptance testing is
required after any change, addition or deletion of system components, or after any
modification, repair or adjustment to system hardware or wiring. All components, circuits,
system operations, or software functions known to be affected by a change must be 100%
tested. In addition, to ensure that other operations are not inadvertently affected, at least
10% of initiating devices that are not directly affected by the change, up to a maximum of
50 devices, must also be tested and proper system operation verified.
The 4100-6077AU
MX
Digital Loop Card is a 4 x 10 inch (double-height) PDI module
that interfaces a single
MX
Digital Loop to the 4100ESi fire panel.
Features:
• 4 x 10 inch double-height PDI module
• Interfaces
MX
Loop to 4100ESi
• Supports up to 250
MX
devices
• 500mA Loop power
• Electrically isolated
MX
Loop with earth fault monitoring
Cautions and
Warnings
Introduction
4100-6077AU
MX
Digital Loop Card
Installation Instructions
This publication discusses the following topics:
Topic
Page
Introduction to the
MX
Digital Loop Card
2
Installing the
MX
Digital Loop Card
4
Configuring the
MX
Digital Loop Card
6
Wiring the
MX
Digital Loop Card to Addressable Devices
8
Compatible
MX
Addressable Devices
10
In this
publication
