5. Program chip
Press “Program” button to Program chip.
GreenPAK Universal Dev. Board 1 can be used as
test fixture to easily verify your design functionality.
To enable test board mode click “Test Mode” button.
If “Test Board” button becomes orange the
schematics in GreenPAK Emulation Tool window
represents the actual state of the Development
board. All the changes will be immediately applied
to board configuration.
When the
“Test Board” button is gray, the
Development board returns to default settings.
Support
Visit Silego website for Application Notes and
Training Videos at
http://www.silego.com
If you need any additional support, please refer to
the support section of Silego website.
http://support.silego.com
GreenPAK
Universal Dev. Board 1
Quick Start Guide
Getting Started
1. Verify Kit Contents
2. Install GreenPAK Designer Software
3. Prepare Development Board
4. Use Emulation Tool
5. Program Chip
1. Verify Kit Contents
Development Board:
Socket Board:
GreenPAK Samples:
USB A to mini B cable:
