![background image](http://html.mh-extra.com/html/siemens/563-004/563-004_installation-instructions_384569001.webp)
Installation Instructions
Document No. 563-002
January 12, 2007
Wireless Field Level Network Transceiver (FLNX)
(Version 1.x)
Channel
Network I.D.
WLAN0001R1
24 Vac 1.2VA
E H N
F L N
Figure 1.
Wireless Field Level Network Transceiver
(FLNX).
Product Description
The Wireless Field Level Network Transceiver
(FLNX) is mounted at or near the FLN device
and is powered by 24 Vac. The antenna can be
mounted directly to the radio or mounted remotely for
installations where the location of the FLNX causes
the antenna to be shielded—for example, when the
FLNX is mounted inside a TEC enclosure.
Product Numbers
563-004
Wireless Field Level
Network Transceiver (FLNX)
(Version 1.x)
563-007
Direct Mount Antenna
563-008
Remote Mount Antenna
Transceivers do not come with antennas.
Antennas must be ordered separately.
Accessories
563-027
Pre-terminated Cable Kit
(Includes two 14” cables:
power and communication)
Recommended for factory mounting
Warning/Caution Notations
WARNING:
Personal injury/loss of life may occur if you
do not follow the procedures as speci
fi
ed.
CAUTION:
Equipment damage or loss of data may
occur if you do not follow the procedures
as speci
fi
ed.
Expected Installation Time
10 minutes
Required Tools and Materials
•
Electro-static discharge wrist strap
•
Small
fl
at-blade screwdriver
•
Cordless drill/driver set
Prerequisites
•
All wiring must conform to NEC and local
codes and regulations.
•
24 Vac Class II power source is available.
•
Metal Oxide Varistors (MOVs) must be used
for TECs that switch high voltage devices. For
details, see the FSN for
Terminal Equipment
Controllers (TECs) Failing when Switching
High Voltage Powered Devices
.
•
Any application speci
fi
c hardware or device
is installed.
Item Number: 563-002, Rev. BA
Page 1 of 4