1
E
Convection Microwave Drawer: SMD2499FS
INSTALLATION MANUAL
IMPORTANT NOTES TO THE INSTALLER
•
Read all of the Installation Manual before installing the
Convection Microwave Drawer.
•
Remove all packing material before connecting the electrical
supply.
•
Observe all governing codes and ordinances.
•
Be sure to leave these instructions with the consumer.
IMPORTANT NOTES TO THE CONSUMER
Keep this manual with your Operation Manual for future reference.
•
As when using any oven generating heat, there are certain safety
precautions you should follow. These are listed in the Operation
Manual. Read all and follow carefully.
•
Be sure your Convection Microwave Drawer is installed and
grounded properly by a qualified installer or service technician.
• This unit comes equipped with a Wi-Fi connectivity option.
In order to activate the Wi-Fi functionality, the area in which
the unit is installed requires a Wi-Fi signal. Please see the
operation manual for the minimum Wi-Fi specifications.
IMPORTANT SAFETY INSTRUCTIONS
If the information in this manual is not followed
exactly, a fire or electrical shock may result that could cause property
damage, personal injury or death.
•
This Convection Microwave Drawer must be electrically
grounded in accordance with local codes.
•
Make sure the wall coverings and the cabinets around the
Convection Microwave Drawer can withstand the heat
generated by the Convection Microwave Drawer.
NEVER LEAVE CHILDREN ALONE OR
UNATTENDED IN THE AREA WHERE A CONVECTION MI-
CROWAVE DRAWER IS IN USE. NEVER LEAVE THE DRAWER
OPEN WHEN THE OVEN IS UNATTENDED.
STEPPING, LEANING OR SITTING ON THE
DRAWER MAY RESULT IN SERIOUS INJURIES AND CAN
ALSO CAUSE DAMAGE TO THE CONVECTION MICROWAVE
DRAWER.
•
Do not use the Convection Microwave Drawer as a storage
space. This creates a potentially hazardous situation.
•
Check that the time-of-day is in the display. If not, touch STOP/
CLEAR for safety reasons and to prevent unintended use.
1
SPECIAL WARNING
• INSTALLATION AND SERVICE MUST BE PERFORMED
BY A QUALIFIED INSTALLER.
• IMPORTANT: SAVE this installation manual FOR
LOCAL ELECTRICAL INSPECTOR’S USE.
• READ AND SAVE THESE INSTRUCTIONS FOR
FUTURE REFERENCE.
CLEARANCES AND DIMENSIONS
For SAFETY CONSIDERATIONS do not install drawer
in any combustible cabinetry, which is not in accord
with the stated clearances and dimensions on pages
2 - 4. See Figures 1 - 7.
UNPACKING YOUR CONVECTION
MICROWAVE DRAWER
A minimum of two people are required to handle the oven. Use
the two handles located on each side of the oven to lift.
1
Remove all packing materials from inside the Convection Micro-
wave Drawer and on the Drawer door.
2
Remove the feature sticker, if there is one. Check the drawer for
any damage, such as misaligned or bent drawer, damaged drawer
seals and sealing surfaces, broken or loose drawer guides and dents
inside the cavity or on the front side of the drawer. If there is any
damage, do not operate the Convection Microwave Drawer and
contact your dealer or a SHARP AUTHORIZED SERVICER.
Sealing
Surface
Oven
Cavity
Sealing
Surface
Summary of Contents for SMD2499FS
Page 7: ......
