background image

1

  1  Electric shock could occur if used outdoors or on wet surfaces.

  2  Do not leave the unit from unattended when the unit is plugged in. Unplug the unit from the outlet when not in 

      use and when user servicing.

  3  Close attention is necessary when used by or near children. Do not allow to be used as a toy.

  4  Use only for intended use as described in this manual.  Use only the manufacture's recommended attachments.   

  5  Never  operate this vacuum cleaner if it has a damaged cord or plug, if it is not working properly, if it has been    

      dropped, damaged, exposed to weather or dropped into water.

      Return the vacuum cleaner to a Sharp Authorized Servicer  for examination and repair.

  6  Do not pull or carry this vacuum cleaner by the power cord. Do not use the power cord as a handle,  close a door  

      on the cord, or pull the cord around sharp edges or corners. 

      Keep cord away from heated surfaces. 

  7  Never disconnect the plug by pulling on the  cord. To disconnect from an outlet, grasp the plug, not the cord.

  8  Never operate this vacuum cleaner with any air opening blocked.   

      Keep the air openings free of dust, lint, hair and any other similar material. When the motor pre-filter becomes  

      dirty, rinse in warm water . Filter should be completely dry before reusing.

  9  Never drop or insert any object into any opening.

10  Keep  hair

, face, fingers and loose clothing away from any opening, such as all moving parts.

11  Do not pick up lit cigarettes, hot ashes, matches or similar materials, razor blades, needles, pins or  other sharp 

objects. Do not suck water or any other liquid.  

1

2  Do not use the vacuum cleaner without the high efficiency air filter installed. Doing so can cause damage to the unit.

1

3  Before removing the plug from the outlet, push switch to "Stop".

1

4  Use extra caution when cleaning on stairs.

1

5  Never handle the plug, cord or vacuum cleaner with wet hands.

16  Do not use in presence of flammable or combustible liquids or fumes.

1

7  Do not place heavy objects on the vacuum cleaner.

1

8  Do not step on the hose or pull the hose forcibly.

1

9  Do not pick up large objects such as waste paper or cloth which may clog the hose.

20  Do not expose this vacuum cleaner to high temperatures while operating or during storage.

21  Store this vacuum cleaner in a dry place.

22  Use the carrying handle of the body to carry this vacuum cleaner.

23  Rewind the cord by holding the plug to prevent any injury. 

24  Children should be supervised to ensure that they do not play with the appliance. 

25  This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental  

      capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concern

-

ing use of the appliance by a person responsible for their safety.

Caution : If the cord of this appliance is damaged, it must only be replaced by an Authorized Service Center appointed

                 by SHARP  in order to avoid hazard.

SAVE THESE INSTRUCTIONS

This vacuum cleaner is intended for household use only.

WARNING

Operate vacuum cleaner only at the voltage 

specified on nameplate.

EC-S2142

EC-S2141

VACUUM CLEANER

OPERATION MANUAL

Thank you very much for buying SHARP.

Before using your SHARP vacuum cleaner, please read this operation 

manual carefully to obtain the best use from your vacuum cleaner.

WARNING /

T

o reduce the risk of fire,  electric shock or injury:  

MODEL

   

EC-S2142,S2141.indd   1

12.5.8   2:58:02 PM

Summary of Contents for EC-S2141













Reviews: