background image

ROOM AIR CONDITIONER

INSTALLATION AND OPERATION
                     MANUAL

PAGE

CONTENTS

This INSTALLATION AND OPERATION
MANUAL explains the proper use of your   new
Sharp Air Conditioner. Read these instructions
carefully before installing  or operating  your air
conditioner. The INSTALLATION  AND  OP-
ERATION  MANUAL   should be kept in a safe
place for handy reference.

FOR YOUR PROTECTION ....................

  2

CONSUMER LIMITED WARRANTY .....

  3

INSTALLATION INSTRUCTIONS

• CHECK WINDOW AREA ........................   4
• LOCATlON ..............................................   4
• ITEMS PACKED WITH THlS UNIT .........   5
• SUGGESTED TOOLS ............................   5
• INSTALLATION .......................................   5

PRECAUTIONS

• 

CAUTION FOR USE ............................   8

• GROUNDING INSTRUCTIONS ...........   8
• NOTES ON OPERATION ....................   9
• ENERGY EFFICIENCY TIPS ...............   9

HOW TO OPERATE

• PARTS NAMES ................................... 10

• 

COOLING OPERATION ...................... 11

• TO CHANGE TEMPERATURE SETTING .......... 11
• TO CHANGE FAN SPEED AND
                        OPERATION MODE ....... 12
• ENERGY SAVER ................................. 13
• TO CHANGE AIR FLOW DIRECTION ....... 13
• EXHAUST ............................................ 13
• ON TIMER OPERATION ..................... 14
• OFF TIMER OPERATION .................... 15
• USING THE REMOTE CONTROL ....... 16

CLEANING AND MAINTENANCE ........

18

BEFORE CALLING FOR SERVlCE ......

19

AF-S100DX
AF-S120DX

AF-R100DX
AF-R120DX
AF-R140DX

As an ENERGY STAR Partner, Sharp Electronics has determined that this product (AF-S100DX, AF-
S120DX) meets the ENERGY STAR guidelines for energy efficient air conditioners.  To meet these
guidelines, air conditioners must be at least 10% more efficient than the minimum Federal standard.

Summary of Contents for AF-100DX





















Reviews: