*
**
LED’s
work
A
BRAND
SHADA
WEEE NL: 3505
WEEE DE: 37281017
WEEE AT: 40133
Imported by
Kanaal Noord 350
NL-7323 AM Apeldoorn
www.shada.nl
20161027
300194
300195
300196
30
50
80
230V / 50 Hz - 130mA
230V / 50 Hz - 217mA
230V / 50 Hz - 348mA
>0,95
2.250
3.750
5.600
75
70
4.000
Neutral White
15.000
15.000x
120°
<2s
L 225 x B 60 x H 185
L 285 x B 78 x H 235
L 425 X B 110 X H 325
L 300 x W 245 x H 375
L 360 x W 310 x H 360
L 540 X B 400 X H490
Ra>70
A
230V direct drive LED PCB
2835 SMD (84x)
2835 SMD (140x)
2835 SMD (240x)
IP65
No
5m, H07RN-F 2x1,0mm²
CEE 7/7 - IP44
-20°C ≤T ≤40°C
Aluminium powder coated
Impact resistant polycarbonate
Specifications
Art Nr.
Power (W):
Input voltage (V AC):
Power factor
Luminous flux (lm):
Lumen/W
Color temperature (K):
Color description
Lifespan(h):
Switching cycles (on/off):
Beam angle:
Warm up-time (95%):
Dimensions LED construction lamp(mm):
Dimensions Rack(mm):
Colour rendering index (CRI):
Energy class:
Driver:
LED type:
Protection class IP:
Dimmable
Cable type:
Plug type
Working temperature (T °C):
Housing:
Protective window:
Packaging contents
1x LED Construction lamp
1x manual
General safety instructions
Please read the operating instructions for the LED Construction
lamp before use. The operating instructions are part of the
product. They contain important notes on start-up and handling
of the device. Always keep the enclosed operating instructions so
as to be able to look up information. They must be enclosed when
passing the device on to third parties.
Safety precautions
The user must observe the safety notes and warnings in order
to maintain this status and to ensure safe operation. Please
read the operating instructions before start up.
Never attempt to open the device, the LED Construction lamp
cannot be repaired; this part must be immediately disposed
in case of a defect. Ensure sufficient ventilation of the device.
Never cover it during operation. Do not install in reach of
children or animals.
Any other use of the device than described can damage the
product or endanger the user due to e. g. short-circuits, fire
or an electric shock. The entire product may not be modified
or adapted.
These safety notes must be observed in all cases! Any
warranty claim is void in the case of damages caused by
non-observance of these operating instructions. We are not
liable for consequential damages or for damages to property
or persons caused by non-observance of the safety notes and
improper operation of the device.
Safe operation is not possible anymore, if:
- the LED Construction lamp has visible damages,
- the LED Construction lamp does not work anymore
Safety notes
LED-lights are extremely bright. Under no circumstances look
into the light beam of the LED Construction lamp, as this may
cause permanent damage to your eyes.
*If the window is broken,
it has to be replaced with a new original protective window of
impact resistant polycarbonate before further use.
**FIRE HAZARD!
Fit the light so that it is at least 1 m away from the material to
be illuminated. Excessive heat can result in a fire.
RISK OF INJURY FROM BURNS!
Ensure the light has been switched off and allowed to cool
before you touch it.
To prevent hazards,
a damaged flexible outer lead of this light may only be exch-
anged by the manufacturer, his service representative or
by an equally qualified specialist.
Attention:
To prevent hazards, a damaged flexi-
ble outer lead of this light may only
be exchanged by the manufacturer,
his service representative or by an
equally qualified specialist.
Notes:
• Please ensure a safe and firm surface for the LED construc-
tion lamp to stand on.
• Please ensure that the cable is not getting squashed or
otherwise damaged.
• The LED construction lamp with carrier can be adjusted
continuously within the swivelling range.
• Plug is
IP44
GB
Installation and Operating Manual
Notes on Disposal
Old units, marked with the symbol as illustra-
ted, may not be disposed of in the household
rubbish.
You must take them to a collection point for
old units (enquire at your local authority)
or the dealer from whom you bought them.
These agencies will ensure environmentally friendly disposal.
Care and warranty
Before cleaning the unit, disconnect it if necessary from other
components; do not use aggressive cleaning agents.
The unit has been carefully checked for defects. If nevertheless
you do have cause for complaint, please go back to the retailer
where you have bought the product together with your proof
of purchase. The warranty for manufacturing faults runs for 1
year from the date of purchase. It excludes any compensation
for installation and other costs. The dealer or manufacturer
can change this guide at any time and without prior notice.
Visit us online at www.shada.nl for more information about
our products and our company.
CE declaration
This product is according next directives:
2014/35/EU
2014/30/EU
2011/65/EU
Additionally, for Products with Radio transmitter units:
R&TTE 2014/53/EU
The complete Declaration of Conformity Document (DOC) can
be found here: http://www.shada.nl/uploads/DoCs/index.
html
Protection
Class II
