©2007 by Senco Products, Inc. www.senco.com
1¾
1
7
⁄
8
2¼
2
.092
}
EL
2
.092
1
.082
.082
Applications:
Features and Benefits:
Tool Specifications:
Fastener Specifications:
The PalletPro
™
57F Coil Nailer is built for high speed operation, this
coil nailer is designed to handle the toughest production applications.
Item #: 4L0001N Contact Actuation (Dual Action)
Weight: 5.9 lbs. ( 2.67 kg)
Height: 11.14" (283 mm)
Length: 11.97" (304 mm)
Nail Capacity: 300 - 350
Operating Pressure: 70-120 psig (4.8-8.3 bar)
Mode of Operation: Tool is available with either sequential
or contact actuation trigger mechanism.
Hose Fitting:
3
⁄
8
“ NPT
Drives full round head coil nails from 1" - 2¼" smooth and ring shank,
.082 - .092 diameter.
A lightweight and versatile tool for boxes and crates, carton-to-skid and
pallets.
• Collation – wire weld
• Aluminum mainbody – tool weighs only 5.9 lbs.
• Adjustable nail canister accommodates wide range of nails
• High capacity nylon magazine – fast and easy loading
• Body protection – side steel wearplates reduce abrasion of tool
• High durability driver and piston bumper for long life
PalletPro
™
57F
Coil Nailer
FU
LLROUND
H EAD
For additional information on how SENCO will save you time, reduce
costs, and increase quality, call us at 1-800-543-4596 to find your
nearest Authorized Senco Dealer or Distributor or visit our web site at:
www.senco.com
Sequential Actuation Trigger
(also known as restrictive trigger or trigger fire)
operates in the following sequence - depress the safety element at the nose of tool
against the work surface then pull the trigger. After each fastener is driven, release
the trigger and lift the tool off the work surface before starting the sequence again.
This trigger is recommended and acceptable for most applications.
Contact Actuation Trigger
(also known as dual action, bounce or bottom fire)
operates in the following sequence- pull the trigger first and keep the trigger pulled
while moving the tool along the work surface with a bouncing motion, depressing
the safety element at the nose of the tool against the work surface where the fastener
is to be driven. This trigger is recommended for use by trained professionals only
in high production or volume applications.
Always read the Operators Manual and Safety Instructions with all tools to ensure
proper use and safety precautions or log on to www.senco.com or call
1-800-543-4596 for more information on SENCO’s trigger systems. Choose the
right trigger system for your specific needs!
LIM
ITE
D WARRA
NT
Y
YEAR
1
}
ED
