background image

Rev Oct.24-2013

Table of Contents

Warnings and Safe Play Instructions. . . . . . . . . . . . . . . pg. 2
Protective Surfacing Guidelines. . . . . . . . . . . . . . . . . . . pg. 3
Instructions for Proper Maintenance  . . . . . . . . . . . . . . . pg. 4
About Our Wood – Limited Warranty   . . . . . . . . . . . . . . pg. 5
Keys to Assembly Success  . . . . . . . . . . . . . . . . . . . . . . pg. 6
Metric Conversion Sheets  . . . . . . . . . . . . . . . . . . . . . pg. 7,8
Part ID . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . pg. 9

9405195

1 - 2 Hrs

Two person

assembly

FR: 

Pour obtenir la notice de montage dans votre langue, cliquez sur www.selwoodproducts.com

DE:

 Gehen Sie auf www.selwoodproducts.com um die Bauanleitung in thre Sprache zu bekommen.

www.selwoodproducts.com

Europe

The Granary, Weathercock Hill  

Chevington, Bury St  

Edmunds, Suffolk IP29 5RG

 

North America

375 Sligo Road West.

P.O. Box 10 Mount Forest

Ontario, Canada N0G 2L1

Australia

Unit 6/168 - 180 Victoria Road

Marrickville, Sydney NSW 2204

ASSEMBLY INSTRUCTIONS

2 POSITION MONKEY LADDER SWING – A25195

To reduce the risk of serious injury or death, you must read and 

follow these instructions. Keep and refer to these instructions often 

and give them to any future owner of this play system. Manufacturer contact information provided below.
OBSTACLE FREE SAFETY ZONE - 

4.1 m x 7.92 m 

area requires Protective Surfacing. See page 3. 

MAXIMUM VERTICAL FALL HEIGHT - 

1.8 M 

CAPACITY - 

2

 Users Maximum, Ages 

3

 to 

10

; Weight Limit 

110 lbs. (49.9 kg)

 per child.

RESIDENTIAL HOME USE ONLY. Not intended for public areas such as schools, churches, nurseries, day cares or parks.

WARNING 

 7.92M 

 2.3M 

 4.1M 

 2.4M 

2 Pos. Monkey Ladder Swing

Summary of Contents for A25195





























Reviews: