Assembly Manual
Assembly
Children's swing set must be assembled in accordance with step 1 - 5 in this assembly manual.
At least two people are required to ensure safety of assembly.
Installation
Children's swing set must be installed on a smooth surface covered with an appropriate material, i.e. sand, bark, or well maintained
grass.
Installation must take place in accordance with step 5 in this assembly manual.
The distance between the swing set and other objects (including those situated above the ground, such as tree branches) should be
at least 1.8 metres.
The legs must be set into the concrete as specified in step 5 of this assembly manual. A substitute such as sand, gravel, or other such
material must
not
be used as this may not guarantee sufficient stability.
Use
Any projecting screws or sharp edges must be planed smooth immediately after installation to avoid potential injuries.
The height of the swing seat (350mm above ground level), as well as the condition of the set, must be checked on a daily basis.
Check on a daily basis that the closing clips on the hanging brackets are fully closed and in fully workable condition.
Stability, wear on moving parts and strength of connections should be checked no less frequently than 1 to 3 months.
The condition of the base material, corrosion of metal parts and rotting of wooden parts should be checked once a year.
Moving parts must be oiled and worn and/or defective parts should be replaced with parts provided by the manufacturer.
Bolts and ropes must be checked regularly and tightened if required.
WARNING!
- This product is designed to be used by children from the ages of 3 to 14 and only under the supervision of adults.
- Use of the product by children under the age of 3 is not permitted.
- Items of clothing causing increased danger such as hoods, buttons, etc. may become caught during use of the product
and may, therefore, present a risk of suffocation to the wearer.
- The product is only designed for outdoor use in private residences.
NB! The structure MUST NOT be altered without the consent of the manufacturer. This manual should be kept in order to avoid later
disputes.
For your information:
Wood, as a natural material, is sensitive to changes in the environment. Fluctuations in temperature and weather conditions may cause the wood to split and harden -
particularly in the case of machine-cut wood products. However, this generally does not affect the strength of the wood.
The below must be read before assembly
ANYA SWING SET
Page 1
