![background image](http://html1.mh-extra.com/html/sealey/worksafe-ssp19f/worksafe-ssp19f_quick-start-manual_1226266001.webp)
DELUXE EAR DEFENDERS - FOLDING
MODEL NO:
SSP19F
Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these
instructions, and properly maintained, give you years of trouble free performance.
IMPORTANT:
PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
1. SAFETY
WARNING! Put the ear defenders on before exposing yourself to noise and wear them during the whole noise exposure.
Be warned that failure to adhere to these recommendations will cause the protection afforded by the product to be severely
impaired.
9
Regularly check for serviceability.
9
Ear defenders may be adversely affected by certain chemical substances. Further information should be sought from manufacturer
of the chemicals that they may come into contact with.
9
Ear defenders and in particular the cushions, may deteriorate with use and should be examined at frequent intervals for cracking
and deterioration. Replace after 2 to 3 years of normal use or sooner if there are any signs of deterioration.
8
DO NOT
replace any parts, there are no replacement parts.
9
The fitting of hygiene covers to the cushions may affect the acoustic performance of the ear defenders.
9
Ear protection will be reduced if the defenders are not well fitted and not regularly checked.
9
If the recommendations given in the instructions are not followed, the protection provided by the ear defenders will be significantly
reduced.
WARNING!
These ear-defenders are of universal size range. Ear-defenders complying with EN 352-1 are of universal size range.
Universal ear-defenders include small, medium and large size and are thus designed to fit the majority of wearers including for those
whom medium size does not fit.
2. INTRODUCTION
L
ightweight, yet rugged construction, certified to BS EN 352-1:2002 standard. Hearing protection level in excess of the standard, with an SNR
of 32dB. Fully adjustable ear cups to ensure a precise seal against the head. Arms fold in for easy storage. Fully approved to protect against
high noise levels in most working environments. Nett weight: 297g
3. ATTENUATION VALUES
4. USE
4.1.
Unfold the ear defenders.
4.2.
Place cups over the ears, adjust the height for optimum comfort by sliding the cups up or down whilst holding the headband in place.
Ensure the headband rests on the top of the head to support the defenders.
4.3.
Make sure the cushions form a snug seal around the ears and reduce noise effectively.
5. CLEANING
5.1.
Clean with warm soapy water,
DO NOT
use organic solvents or alcohol for cleaning.
5.2.
DISINFECTION
5.2.1.
Disinfect every 3 months according to use.
5.2.2.
Any part of the ear defender which is in contact with the wearer, shall be disinfected with a product suitable for use on plastics,
(materials used: Polycarbonate/Polyoxymethylene headband, Acrylonitrile Butadiene Styrene/High Impact Polystyrene cup and soft
Polyvinyl Chloride leather) and not known to be harmful to the wearer.
Original Language Version
© Jack Sealey Limited
Refer to
instructions
SSP19F Issue 1 08/07/20