instructions for
terminal tool kit 23pc
model no:
VS9203
thank you for purchasing a Sealey product. manufactured to a high standard, this product will, if used according to these
instructions, and properly maintained, give you years of trouble free performance.
1. Safety
WarninG!
Wear approved eye protection. Wear appropriate Personal Protective equipment. A full range of Personal Protective
equipment is available from your sealey stockist.
WarninG!
ensure that Health & safety, local Authority regulations and general workshop practice regulations are adhered to when
using tools.
8
Do not
use tools if damaged.
9
maintain tools to ensure that they are in an adequate condition for safe use and optimum performance.
9
ensure that a vehicle that has been raised by a jack is adequately supported. use axle stands.
9
Wear suitable clothing to avoid snagging.
Do not
wear jewellery. tie back long hair.
9
Account for all tools, parts and components being used.
Do not
leave these in or near the engine. return tools to suitable storage
after use.
9
When not in use, store in a safe, dry childproof place.
9
Keep children and unauthorised persons away from the work area.
▲
imPortant
!
these instructions are intended as a guide only. always refer to the vehicle manufacturer’s service instructions
or a proprietary manual to establish the correct procedure and data.
WarninG! The warnings, conditions and instructions in this manual cannot cover all possible conditions and situations. The Operator/
User must apply caution and common sense (good practical sense).
2. introDuction
comprehensive kit, suitable for the removal of terminals on most wiring connectors. reduce time spent on, and damage to, vehicle electrical
systems. features soft grip handles with number identification.
Vs9203 | issue 1 15/12/17
Original Language Version
© Jack sealey limited
refer to
instructions
Wear eye
Protection
Wear Protective
clothing
