background image

1.  safety instructions

instructions for: 

compact auto digital battery 

charger 3 cycle - 12v

 

MoDEL no:

 

smc01

thank you for purchasing a sealey product. Manufactured to a high standard this product will, if used according to these instructions and 

properly maintained, give you years of trouble free performance.

IMPORTANT

please read these instructions carefully. note the safe operational reQuirements, Warnings, and 

cautions. use this product correctly, and With care for the purpose for Which it is intended. failure to do so 

may cause damage and/or personal inJury and Will invalidate the Warranty.

1.1 

electrical safety

 

WArninG! it is the responsibility of the owner and the  

 

operator to read, understand and comply with the 

 

following: You must check all electrical products,  

 

 

before use, to ensure that they are safe. You must  

 

 

inspect power cables, plugs, sockets and any other    

 

connectors for wear or damage. You must ensure that   

 

the risk of electric shock is minimised by the installation of   

 appropriate safety devices. A residual current circuit    

 Breaker (rccB) should be incorporated in the main 

 

distribution board. We also recommend that a  

 

 

residual current Device (rcD) is used. it is particularly   

 important to use an rcD with portable products that    

 

are plugged into a supply which is not protected by an   

 

rccB. if in any doubt consult a qualified electrician.    

 

You may obtain a residual current Device by 

 

contacting your sealey dealer. You must also read and    

 understand the following instructions concerning 

 

electrical safety.

1.1.1 the 

electricity at Work act 1989

 requires that all  

 

 portable 

electrical appliances, if used on business premises,    

 

are tested by a qualified electrician, using a Portable    

 

Appliance tester (PAt), at least once a year.

1.1.2 the 

health & safety at Work act 1974

 makes  

 

   

owners of electrical appliances responsible for the safe  

   

condition of those appliances and the safety of the  

 

   

appliance operators. if in any doubt about electrical  

 

   

safety, contact a qualified electrician.

1.1.3  Ensure that the insulation on all cables and on the  

 

 

appliance is safe before connecting it to the power  

 

 

supply. see 1.1.1 and 1.1.2 and use a Portable  

 

 

Appliance tester.

1.1.4  Ensure that cables are always protected against short   

 

circuit and overload.

1.1.5  regularly inspect power supply cables and plugs for    

 

wear or damage and check all connections to ensure    

 

that none are loose.

1.1.6 

important:

 Ensure that the voltage marked on the  

 

 

appliance matches the power supply to be used and    

 

that the plug is fitted with the correct fuse - see fuse    

 

rating to right.

1.1.7 

do not

 pull or carry the appliance by the power cable.

1.1.8 

do not

 pull the plug from the socket by the cable.

1.1.9 

do not

 use worn or damaged cables, plugs or 

 

connectors. immediately have any faulty item repaired    

 

or replaced by a qualified electrician. When a Bs 1363/A    

 

uK 3 pin plug is damaged, cut the cable just above the    

 

plug and dispose of the plug safely. fit a new plug  

 

 

according to the following instructions (uK only).

a) 

connect the green/yelloW earth wire to the  

 

 

earth terminal ‘e’.

b) 

connect the broWn live wire to the live terminal ‘l’.

c) 

connect the blue neutral wire to the neutral  

 

 

terminal ‘n’.

d) 

after wiring, check that there are no bare wires,  

 

 

that all wires have been correctly connected, that    

 

the cable outer insulation extends beyond the cable  

 restraint 

and that the restraint is tight. 

 

Double insulated products, which are always marked    

 

with this symbol       , are fitted with live (brown) and    

 

neutral (blue) wires only. to rewire, connect the wires    

 

as indicated below. 

do not

 connect either wire to the  

 

earth terminal.

 

1.1.10 if an extension reel is used it should be fully    

 

unwoundbefore connection. A reel

 

with an rcD fitted is preferred

 

since any appliance plugged into  

 

 

 

it will be protected. the cable core

 

section is important and should be

 

at least 1.5mm², but to be 

 

absolutely sure that the capacity 

 

of the reel is suitable for this

 

product and for others which may

 

be used in the other output sockets, we recommend the 

 

use of 2.5mm² section cable.

1.2 

general safety

 

WARNING!

 

Do not usE on AnY otHEr BAttEriEs 

 

APArt froM 

sealed lead acid

 BAttEriEs.

 

WARNING!

 

Disconnect the charger from the mains    

 

power before servicing or performing any maintenance.

 

Disconnect the charger from the mains power before    

 

disconnecting from the battery.

 

Maintain the

 

charger in good condition (use an  

 

 

authorised service agent only).

  

Keep the charger clean for best and safest performance.

  

WARNING!

 Ensure there are no sources of ignition near  

 

  the work area i.e. naked flames, cigarettes, flame 

 

  heaters etc as the charging process produces 

 

  explosive gases.

  

WARNING!

 Ensure the working area is well ventilated

 

  as the gases produced are explosive.

  

Locate the charger in a suitable work area. Keep area    

 

  clean and tidy and free from unrelated materials, and    

 

  ensure there is adequate lighting.

  

Wear approved safety eye protection (standard 

 

 spectacles are not adequate).

  

remove ill fitting clothing. remove ties, watches, rings,   

 

  and other loose jewellery, and contain long hair.

  

read vehicle manufacturer’s instructions manual to  

 

 

  check for any specific battery charging information.

 

  Disconnect the battery from the vehicle and move it to   

 

  a safe, dry level area for charging. if the battery cannot  

 

  be removed from the vehicle refer to manufacturer’s 

 

  hand book.

Original Language Version

© Jack sealey Limited

sMc01    issue: 4(sP) - 18/07/13

fuse rating 3 amp

Reviews: