Sealey SA3/S, Instructions

Page: 1 / 2

Thank you for purchasing a Sealey Product. Manufactured to a high standard this product will, if used according to these instructions
and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS,
WARNINGS AND CAUTIONS. USE THIS PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH
IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY AND WILL INVALIDATE
THE WARRANTY. PLEASE KEEP INSTRUCTIONS SAFE FOR FUTURE USE.
1. SAFETY INSTRUCTIONS
3
Follow all Health & Safety and general workshop rules, regulations and conditions when using the wrench.
p
WARNING! Disconnect from air supply before changing accessories or servicing.
3
Maintain the wrench in good condition and replace any damaged or worn parts. Use genuine
parts only. Unauthorised parts may be dangerous and will invalidate the warranty.
p
WARNING! Check correct air pressure is maintained and not exceeded. We recommend 90psi.
3
Keep air hose away from heat, oil and sharp edges. Check air hose for wear before each use
and ensure that all connections are secure.
3
Only use impact sockets which are specifically designed for use with an impact wrench.
3
Wear approved safety eye/face shield, ear defenders and hand protection.
p
WARNING! Due to the possible presence of asbestos dust from brake linings, when working
around vehicle brake systems we recommend you wear suitable respiratory protection.
3
Maintain correct balance and footing. Ensure that the floor is not slippery and wear non-slip shoes.
3
Keep children and non-essential persons away from the work area.
7
DO NOT use the wrench for a task that it is not designed to perform.
p
WARNING! DO NOT use the wrench if it is damaged or thought to be faulty.
7
DO NOT use wrench unless you have been instructed in its use by a qualified person.
7
DO NOT carry the wrench by the air hose, or yank the hose from the air supply.
7
DO NOT operate the wrench if you are tired or under the influence of alcohol, drugs or
intoxicating medication.
7
To avoid unintentional starting DO NOT carry the wrench with your finger on the trigger.
7
DO NOT direct air from the air hose at yourself or others.
3
When not in use, disconnect from the air supply and store in a safe, dry, childproof location.
INSTRUCTIONS FOR
1/2” SQ DRIVE HEAVY DUTY
AIR IMPACT WRENCH
Model:
SA3/S
PARTS LIST FOR MODEL
SA3/S
01284 757500
sales@sealey.co.uk
www.sealey.co.uk
01284 703534
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component
parts without prior notice. IMPORTANT: No liability is accepted for incorrect use of this equipment. WARRANTY: Guarantee is 12
months from purchase date, proof of which will be required for any claim. INFORMATION: For a copy of our latest catalogue and
promotions call us on 01284 757525 and leave your full name and address, including postcode.
Sole UK Distributor, Sealey Group , Bury St. Edmunds, Suffolk.
2. INTRODUCTION & SPECIFICATION
Drive . . . . . . . . . . . . . . . . . . . . .1/2”sq
Working/Max Torque . . . . .350/400lb.ft
Ultimate Torque . . . . . . . . . . . . 470lb.ft
Air Consumption . . . . . . . . . . . . .4cfm
Operating Pressure . . . . . . . . . . .90psi
Air Inlet . . . . . . . . . . . . . . . . . .1/4”BSP
Weight . . . . . . . . . . . . . . . . . . . .2.5kg
Vibration . . . . . . . . . . . . . . . . . . .5m/s
2
Noise . . . . . . . . . . . . . . . . . . .95.5dBA
2.1. Introduction
Superior quality wrench suitable for garage and tyre-shop use. Fitted with rocking-dog type
clutch mechanism with hardened anvil and cage. Features adjustable air/torque control and
reversible action.
Issue: 1
Date Issued: 051202
Item Part No. Description
1 SA3S/01 Housing
2 SA3S/02 Valve Sleeve
3 SA3S/03 Reverse Valve
4 SA3S/04 Trigger
6 SA3S/06 Screw
7 SA3S/07 Throttle Pin
8 SA3S/08 Steel Ball
9 SA3S/09 Spring
11 SA3S/11 Hose Adaptor
12 SA3S/12 Regulator
13 SA3S/13 O-Ring
14 SA3S/14 Locating Ring
15 SA3S/15 Steel Ball, 3mm
16 SA3S/16 Spring
17 SA3S/17 Anvil Bushing, 32mm
18 SA3S/18 Anvil Collar
Item Part No. Description
33 SA3S/33 Rear End Plate
34 SA3S/34 Pin
35 SA3S/35 Rear Gasket
36 SA3S/36 Rear Cover
37 SA3S/37 Washer
38 SA3S/38 Screw
39 SA3S/39 Protecting Rubber
40 SA3S/40 Oil Seal
41 SA3S/41 Protecting Rubber
42 SA3S/42 Deflector
43 SA3S/43 Screw
44 SA3S/44 Screw
45 SA3S/45 Spring
46 SA3S/46 Pin
47 SA3S/47 Screw
SA3/S - 1 - 051202
Item Part No. Description
19 SA3S/19 O-Ring
20 SA3S/20 Anvil, 1/2” sq
21 SA3S/21 Hammer Cage, 8mm
21 SA3S/21A Hammer Cage, 8.5mm
22 SA3S/22 Hammer Pin, 8mm
22 SA3S/22A Hammer Pin, 8.5mm
23 SA3S/23 Hammer Dog, 8mm
23 SA3S/23A Hammer Dog, 8.5mm
24 SA3S/24 Drive Cam
25 SA3S/25 Cylinder Pin
26 SA3S/26 Cylinder
27 SA3S/27 Rotor
28 SA3S/28 Rotor Blade
29 SA3S/29 Front End Plate
31 SA3S/31 Oil Seal
32 B/6001 Bearing
e-mail
Web
2.2. Specification