![background image](http://html1.mh-extra.com/html/sealey/sa29-s-v2/sa29-s-v2_instructions_1225022001.webp)
Thank you for purchasing a Sealey Product. Manufactured to a high standard this product will, if used according to these instructions
and properly maintained, give you years of trouble free performance.
IMPORTANT:
PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS,
WARNINGS AND CAUTIONS. USE THIS PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH
IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY AND WILL INVALIDATE
THE WARRANTY. PLEASE KEEP INSTRUCTIONS SAFE FOR FUTURE USE.
1.
SAFETY INSTRUCTIONS
SA29/S.V2 - 1 - 191203
INSTRUCTIONS FOR
1 SQUARE DRIVE
AIR IMPACT WRENCH
Model:
SA29/S.V2
01284 757500
E-mail: [email protected]
Web: www.sealey.co.uk
01284 703534
NOTE:
It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component
parts without prior notice.
IMPORTANT:
No liability is accepted for incorrect use of this equipment.
WARRANTY:
Guarantee is 12
months from purchase date. proof of which will be required for any claim.
INFORMATION:
Call us for a copy of our latest catalogue
and promotions on 01284 757525 and leave your full name and address including your postcode.
Sole UK Distributor, Sealey Group
, Bury St. Edmunds, Suffolk.
2.
INTRODUCTION & SPECIFICATIONS
Drive size . . . . . . . . . . . . . . . . . . .1Sq
Air inlet size . . . . . . . . . . 1/2 BSP
Working/Max torque . . . . .900/1100ft.lb
Ultimate torque . . . . . . . . .1150ft.lb
Operating pressure . . . . . . . . . . .90psi
Air consumption . . . . . . . . . 21cfm
Weight . . . . . . . . . . . . . . . . . . . 14.9kg
Vibration level . . . . . . . . . .1.5m/s
2
Sound pressure . . . . . . . . . . .106.8dB
Sound Power . . . . . . . . . .107.5dB
Suitable for commercial and agricultural vehicle use. Long anvil and straight configuration with
rocking-dog clutch for applications with restricted access. Fitted with reverse action. Supplied with
side handle.
Issue : 1
Date : 191203
ITEM PART NO
DESCRIPTION
1
SA29SX-01 MOTOR HOUSING
2
SA29SX-02 REAR COVER
3
SA29SX-03 REAR GASKET
4
SA29SX-04 SCREW
5
SA29SX-05 WASHER
6
SA29SX-06 ANVIL BUSHING
7
SA29SX-07 OIL SEAL
8
SA29SX-08 COVER
9
SA29SX-09 SCREW
10
SA29SX-10 CLUTCH HOUSING
11
SA29SX-11 FRONT GASKET
12
SA29SX-12 SCREW
13
SA29SX-13 WASHER
14
SA29SX-14 SCREW
15
SA29SX-15 HANDLE DEAD
16
SA29SX-16 SCREW
17
SA29SX-17 TRIGGER
ITEM PART NO
DESCRIPTION
35
SA29SX-35 PIN
36
SA29SX-36 CYLINDER
37
SA29SX-37 ROTOR
38
SA29SX-38 ROTOR BLADE
39
SA29SX-39 REAR END PLATE
40
SA29SX-40 PIN
41
SA29SX-41 HAMMER CAGE
42
SA29SX-42 WASHER
43
SA29SX-43 HAMMER PIN
44
SA29SX-44 HAMMER DOG
45
SA29SX-45 DRIVE CAM
46
SA29SX-46 ANVIL
47
SA29SX-47 BUSHING FLANGE
48
SA29SX-48 WASHER
49
SA29SX-49 O-RING
50
SA29SX-50 ANVIL COLLAR
51
SA29SX-51 O-RING
3
Follow all workshop safety rules, regulations, and
conditions when using wrench.
p
WARNING!
Disconnect from air supply before changing
accessories or servicing.
3
Maintain the wrench in good condition and replace
any damaged or worn parts.
Use
g e n u i n e parts only. Unauthorised parts may be
dangerous and will invalidate the warranty.
p
WARNING!
Check correct air pressure is maintained and not exceeded. We recommend 90psi.
3
Keep air hose away from heat, oil and sharp edges. Check air hose for wear before each
use and ensure that all connections are secure.
3
Only use impact sockets which are specifically designed for use with an impact wrench.
3
Wear approved safety eye/face shield, ear defenders, and hand protection.
p
WARNING!
Due to the possible presence of asbestos dust from brake linings, when working
around vehicle brake systems we recommend you wear suitable respiratory protection.
3
Maintain correct balance and footing. Ensure the floor is not slippery and wear non-slip shoes.
3
Keep children and non essential persons away from the working area.
7
DO NOT use the wrench for a task it is not designed to perform.
p
WARNING! DO NOT
use wrench if damaged or thought to be faulty. (Contact Service Agent).
7
DO NOT use wrench unless you have been instructed in its use by a qualified person.
7
DO NOT carry the wrench by the air hose, or yank the hose from the air supply.
7
DO NOT operate wrench if you are tired or under the influence of alcohol, drugs or intoxicating medication.
7
DO NOT carry wrench with your hand on the power trigger in order to avoid unintentional starting.
7
DO NOT direct air from the air hose at yourself or others.
3
When not in use disconnect from air supply and store in a safe, dry, childproof location.
ITEM PART NO
DESCRIPTION
18
SA29SX-18 TRIGGER PIN
19
SA29SX-19 BUSHING
20
SA29SX-20 THROTTLE PIN
21
SA29SX-21 O-RING
22
SA29SX-22 RETAINER, O-RING
23
SA29SX-23 SPRING
24
SA29SX-24 SCREEN
25
SA29SX-25 HOSE FITTING
26
SA29SX-26 O-RING
27
SA29SX-27 DUST COVER
28
SA29SX-28 VALVE SLEEVE
29
SA29SX-29 REVERSE VALVE
30
SA29SX-30 LEVER REVERSE
31
SA29SX-31 PIN
32
SA29SX-32 O-RING
33
SA29SX-33 BEARING
34
SA29SX-34 FRONT END PLATE