BOTTLE JACKS
MODEL NO’S: PBJ2S
Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these
instructions, and properly maintained, give you years of trouble free performance.
IMPORTANT:
PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
1. SAFETY
WARNING!
ALWAYS USE LOAD RATED STANDS TO SUPPORT
LIFTED LOADS
9
Read, study and understand all warnings and operating instructions prior
to use. The usershall work in accordance with this manual.
▲
DANGER!
Use the jack for lifting and lowering only.
▲
DANGER!
DO NOT
place any part of the body beneath the lifted load
unless the load is fully supported by rated axle stands.
▲
DANGER!
DO NOT
place any part of the body beneath the load during lifting or lowering.
8
DO NOT
exceed the rated capacity of the jack, load or maximum stroke.
8
DO NOT
adjust the overload valve, modify or use the jack for any purpose other than for which it is designed
(lifting and lowering
mechanical devices).
8
DO NOT
leave elevated loads unattended, unless safe from others in a garage or workshop.
8
DO NOT
modify the jack.
9
The operator must watch the jack and the load during all movements.
9
Ensure the jacking area is solid and level. Increase the jacking area with a solid flat plate (steel) if jacking on tarmacadam or grass.
9
Keep others away from the work area.
9
Lift only on areas of the vehicle specified by the vehicle manufacturer. Refer to manufacturer’s instructions on proper lifting.
9
Centre load on saddle prior to lifting.
9
Some vehicles require an adapter to properly engage the frame for lifting.
9
Use only attachments, restraints or adaptors supplied by the manufacturer.
8
DO NOT
move or dolly the the vehicle whilst on the jack.
9
Ensure the jacking area is clutter free and that there is adequate lighting.
WARNING! The warnings, cautions and instructions in this manual cannot cover all possible conditions and situations
that may occur. It must be understood by the operator that common sense and caution are factors which cannot
be built into this product, but must be applied by the operator.
WARNING! Failure to heed these warnings may result in personal injury and/or property damage.
2. INTRODUCTION
Fitted with overload valve. Base and reservoir machine welded for increased strength and eliminates leakage. Supplied with 2-piece handle.
3. SPECIFICATION
PBJS series Issue 1 24/05/22
Original Language Version
© Jack Sealey Limited
Refer to
instructions
Wear safety
footwear
Beware crushing
hands
Wear eye
protection
Wear protective
gloves
Model No.
PBJ3S
PBJ5S
PBJ8S
PBJ10S
PBJ12S
PBJ15S
PBJ20S
PBJ30S
PBJ50S
Hydraulic Lift
115mm
125mm
145mm
150mm
150mm
150mm
150mm
165mm
160mm
Max. Height
360mm
402mm
447mm
460mm
441mm
441mm
453mm
440mm
425mm
Min. Height
185mm
207mm
222mm
231mm
231mm
231mm
243mm
275mm
265mm
Screw Extension
60mm
70mm
80mm
80mm
60mm
60mm
60mm
N/A
N/A
Capacity
3tonne
5tonne
8tonne
10tonne
12tonne
15tonne
20tonne
30tonne
50tonne
