Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions,
and properly maintained, give you years of trouble free performance.
IMPORTANT:
PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
LED185 Issue:2 (2,3) - 12/09/18
Original Language Version
© Jack Sealey Limited
Refer to
instruction
manual
beanie haT wiTh rechargeable SpoTlighT
4 SMd led
MODEL NO:
led185
1. SafeTy
9
Inspect the cable and connector for wear and damage to ensure items are safe before connecting to the power supply. If worn or
damaged
do noT
use.
9
Ensure the lamp is fully charged before initial use.
8
do noT
charge in damp conditions.
8
do noT
turn the lamp on when it is being charged.
8
do noT
shine directly into your, another person’s or an animal’s eyes.
8
do noT
allow children to use the lamp.
8
do noT
handle or move the lamp whilst it is being charged.
8
do noT
use the lamp if you suspect that the battery or the lamp casing is damaged.
8
do noT
leave battery in a discharged state, recharge battery immediately. Before storage, fully recharge the battery, subsequently
recharge the battery at least once every six months of non-use.
8
do noT
attempt to open, disassemble, modify or service the battery pack.
8
do noT
crush, puncture, short external contacts or dispose of in fire or water.
8
do noT
expose to temperatures above 60°C (140°).
9
Replace only with the battery pack designated for this product.
9
Recycle or dispose of used battery as stipulated by local regulations.
9
If the electrolyte in the cells gets on your skin, thoroughly wash with soap and water. If it gets in your eyes, rinse thoroughly with cool
water and seek immediate medical attention.
2. inTroducTion
Warm and comfortable beanie hat with a removable SMD spotlight. Features three light settings - full light (100%) medium light (75%) and low
light (50%). Positioning of the LED gives a sufficient beam of light ahead of the user. Removable light is chargeable via a USB port. Powered by
a rechargeable 3.7V 300mAh Lithium-Polymer battery.
3. SpecificaTion
Model no:
.................................................................
led185
Lumen Output: ........................ 100%/75%/50%: 120/90/60lm
Operating time: .................................100%/75%/50%:2/4/5hr
Charging time: ...................................................................3hr
Battery type: ...........................3.7V 300mAh Lithium-Polymer
IP rating:......................................................................... IPX4
Nett weight: ...................................................................... 90g
LED quantity: .......................................................................4
