![background image](http://html.mh-extra.com/html/sealey/gss2323/gss2323_instructions-manual_1224850001.webp)
INSTRUCTIONS FOR
GALVANIZED SHED 2.3 X 2.3 X 1.9M
MODEL NO:
GSS2323 & GSS2323G
Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions,
and properly maintained, give you years of trouble free performance.
IMPORTANT:
PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
1. SAFETY
WARNING!
Ensure Health & Safety, local authority, and general workshop practice regulations are adhered to when building this shed.
9
Keep the work area clean, uncluttered and ensure there is adequate lighting.
9
Keep children and unauthorised persons away from the working area.
8
DO NOT
use the shed for any purpose other than that for which it is designed.
9
Use appropriate safety clothing including eye protection.
8
DO NOT
attempt to assemble in windy weather.
Note:
The assembly of this product will require assistance.
2. INTRODUCTION
Galvanized steel panels easily assembled to form a rigid and secure gable roofed shed. Has a single door which is secured by cross bolt and
eyelet that accepts a padlock (not included) for additional security. Supplied with bolt-down fixing kits.
3. SPECIFICATION
Model no’s: ...........................................GSS2323/GSS2323G
Colour: .................................................................silver/green
Roof type:....................................................................... apex
Doors: ..................................................................................1
Overall size (W x D x H*): .................2300 x 2300 x 1900mm
* minimum wall height
4. CONCRETE PLINTH
Concrete slab: Please ensure that your site is level. It is recommended that your slab is 100mm thick and you use builders plastic and F52
reinforcing mesh. We recommend that you make your slab 100mm bigger than the base dimensions of your shed. This will allow for a 50mm
edge around your shed. We recommend that you slope the 50mm edges downward by 10 mm so that rain water will drain away from your shed.
GSS2323/G | Issue:2(SP) 13/04/17
Original Language Version
© Jack Sealey Limited
Refer to
instruction
manual
Wear eye
protection
Wear safety
footwear
Wear
gloves