INSTRUCTIONS FOR
ELECTRONIC VERNIER CALLIPER
Model No: AK962EV.V2
Thank you for purchasing a Sealey product. Manufactured to a high standard this product will, if used according
to these instructions and properly maintained, give you years of trouble free performance.
IMPORTANT
PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL
REQUIREMENTS, WARNINGS, AND CAUTIONS. USE THIS PRODUCT CORRECTLY AND
WITH CARE, FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY
CAUSE DAMAGE AND/OR PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY.
p
p
WARNING! Ensure Health and Safety, local authority and general workshop practice regulations
are adhered to when using tools and equipment.
7
DO NOT
use calliper if damaged.
3
Maintain calliper in good and clean condition for best and safest performance.
3
Keep the work area clean, uncluttered and ensure there is adequate lighting.
3
Maintain correct balance and footing. Ensure the floor is not slippery and wear non-slip shoes.
3
Keep children and unauthorised persons away from the work area.
1. SAFETY INSTRUCTIONS
2. INTRODUCTION & SPECIFICATION
Hardened and tempered stainless steel calliper with satin finish. 11mm High figures in LCD display for ease of
reading. Metric and Imperial calibration with conversion between the two. Zero setting control allows for
comparative measurement. Supplied in carry-case.
p
p
WARNING! Ensure Health and Safety, local authority and general workshop practice regulations
are adhered to when using tools and equipment.
7
DO NOT
use calliper if damaged.
3
Maintain calliper in good and clean condition for best and safest performance.
3
Keep the work area clean, uncluttered and ensure there is adequate lighting.
3
Maintain correct balance and footing. Ensure the floor is not slippery and wear non-slip shoes.
3
Keep children and unauthorised persons away from the work area.
1. SAFETY INSTRUCTIONS
2. INTRODUCTION & SPECIFICATION
Hardened and tempered stainless steel calliper with satin finish. 11mm High figures in LCD display for ease of
reading. Metric and Imperial calibration with conversion between the two. Zero setting control allows for
comparative measurement. Supplied in carry-case.
Specification
Resolution 0.01mm (0.0005)
Range 150mm (6)
Accuracy ±0.02mm (±0.001) @ <100mm ±0.03mm (±0.001) @ >100mm
Repeatability 0.01mm (0.0005)
Functions Zero set, mm/inch select, incremental zero, ABS
Messages Flashing display = replace battery
Battery life Approx. two years (approx. one year in continuous service)
Battery SR44 - 1.55V
Operational Temperature range 5 - 40
O
C
1 Internal Measure
5 LCD Display
9 Battery Cover
2 Metric/Imperial Selector
6
External Measure
10 Depth Measure
3 Locking Screw
7
On/Off Control
11 Step Measure
4 ABS/0 Switch
8
Zero Control
1 Internal Measure
5 LCD Display
9 Battery Cover
2 Metric/Imperial Selector
6
External Measure
10 Depth Measure
3 Locking Screw
7
On/Off Control
11 Step Measure
4 ABS/0 Switch
8
Zero Control
AK962EV.V2 - (2) - 191005
AK962EV.V2 - (2) - 191005
Thank you for purchasing a Sealey product. Manufactured to a high standard this product will, if used according
to these instructions and properly maintained, give you years of trouble free performance.
IMPORTANT
PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL
REQUIREMENTS, WARNINGS, AND CAUTIONS. USE THIS PRODUCT CORRECTLY AND
WITH CARE, FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY
CAUSE DAMAGE AND/OR PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY.
INSTRUCTIONS FOR
ELECTRONIC VERNIER CALLIPER
Model No: AK962EV.V2
Specification
Resolution 0.01mm (0.0005)
Range 150mm (6)
Accuracy ±0.02mm (±0.001) @ <100mm ±0.03mm (±0.001) @ >100mm
Repeatability 0.01mm (0.0005)
Functions Zero set, mm/inch select, incremental zero, ABS
Messages Flashing display = replace battery
Battery life Approx. two years (approx. one year in continuous service)
Battery SR44 - 1.55V
Operational Temperature range 5 - 40
O
C
