background image

Sistemi elettronici
di Aperture Porte e Cancelli

SEA S.r.l.
DIREZIONE E STABILIMENTO:
Zona industriale 64020 S.ATTO Teramo - (ITALY)
Tel. 0861 588341 r.a. Fax 0861 588344

http://www.seateam.com
e-mail:[email protected]  (Uff. Comm.le)
          

OPERATING INSTRUCTIONS

INDEX 

Do you want to have your personal installer code? .......................................................7

Do you want to set a suitable radio frequency for your transmitter?...............................7

Do you want to change language of your terminal?........................................................7
  
Do you want to set the automatic switch off time of your terminal?................................7

Do you want to create a new code for your transmitter?............................................... 8

Do you want to read the memorized code on the radio transmitter ?.............................8
                      
Do you want a clone of your radio transmitter?..............................................................8

Do you want to check if your radio transmitter is memorized on the  EEPROM memory?............

8

  
Do you want to read and modify the whole data of the memory of your control unit?....9

Do you want to cancel all data from the  EEPROM?......................................................9

Do  you want to input some codes into  the memory ?...................................................9

Do you want to read in the internal  memory all memorized  installations (max14 
installations)?................................................................................................................10

Do you want to write on the internal memory ?.............................................................10

Do you want to reset the memory of all installations ?..................................................10

Do you want to see the adjustments of your automation ?...........................................10

Do you want to see the adjustments of your automation and modify them?.....................10

English

Rev. 04 - 09/2007

1

Summary of Contents for PalmCopy











Reviews: