Scotsman CS60 Service Manual Download

Page: 1 / 17

INTRODUCTION

Table of Contents

INTRODUCTION

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 1

SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 2

FOR THE INSTALLER . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 3

FOR THE PLUMBER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 4

INSTALLATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 5

INITIAL START UP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 6

HOW IT WORKS: COMPONENT DESCRIPTION . . . . . . . . . . . . . . . . . . Page 7

COMPONENT LOCATION . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 8

HOW IT WORKS: WATER . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 9

HOW IT WORKS: REFRIGERATION

. . . . . . . . . . . . . . . . . . . . . . Page 10

HOW IT WORKS: REFRIGERATION

. . . . . . . . . . . . . . . . . . . . . . Page 11

OPERATION & ADJUSTMENT: OPERATING CHARACTERISTICS . . . . . . . . . . Page 12

SANITIZING AND CLEANING . . . . . . . . . . . . . . . . . . . . . . . . . Page 13

SERVICE DIAGNOSIS . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 14

SERVICE DIAGNOSIS . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 15

REMOVAL AND REPLACEMENT . . . . . . . . . . . . . . . . . . . . . . . . Page 16

REMOVAL AND REPLACEMENT . . . . . . . . . . . . . . . . . . . . . . . . Page 17

Service Parts lists and Wiring diagrams are located in the center of this manual, printed on
yellow paper.

This manual was printed on recycled paper.

Keep this manual for future reference.

Note the Warning symbol, it marks a possible hazard.

This service manual covers the installation,
operation, maintenance and service of this ice
machine.

CS60

January 1995

Page 1

Summary of Contents for CS60


















Search results

Summary of Contents for CS60

Reviews:

Related manuals for CS60

Brands by name

Popular brands

Scotsman CS60, Service Manual

Search results

Summary of Contents for CS60

Reviews:

Related manuals for CS60

Brands by name

Popular brands