Operating Instruction Manual
Elektroblock EBL 263-5 Art no 911.056
page 1
/
10
Note: this operating instruction manual is intended for the customer and has to be supplied with the device
Schaudt GmbH, Elektrotechnik & Apparatebau, Daimlerstraße 5, D-88677 Markdorf, Tel +49 7544 9577-0, Fax +49 7544 9577-29, www.schaudt-gmbh.de 18.05.2004
Contents
1. Description
2. Safety
Information
3. Operating
Instructions
4.
Transport, Storage, Installation
5. Electrical
Installation
6.
Power-Up, Shut-Down, Maintenance
7. Malfunction
8. Enclosure
1. Description
The Elektroblock EBL 263-5 is an energy management system for motor homes. It is a combination of
a battery charger, a 12V distribution box and a control and switch panel.
It contains the charging module LA 204, a battery monitor, the complete 12V distribution, fuse-protected
12V circuits and additional control and monitoring devices.
The controls and switches on the front panel, control the living-area functions of the motor home and
indicate certain values like voltages or filling levels.
Tank sensors are necessary to measure the filling levels of the water tanks. Please do order separately.
Note: The EBL 263-5 is not suitable for filling level measurement of metal water tanks.
1.1 Suitable
Accessories
rod tank sensors
2 rod tank sensors, 2 sensor cables 4 x 0.5
2 seal rings art no 126.007, 2 check nuts art no 102.106
or tank sensors
8 tank sensors, art no 933.662, 2 sensor cables 4 x 0.5
1.2 Technical
Data
1.2.1 General
Data
sizes
front panel: 290 x 155
cabinet:
275 x 130 x 173 (W x H x D in mm)
weight 4.4
kg
cabinet
PA (Polyamide), Gentian blue RAL 5010
front panel
aluminium, powder painted, white aluminium RAL 9006
1.2.2 Electrical
Data
mains supply
* 230V (+ 6 / - 10%), 50Hz, safety class 1
current draw
* 230VA
suitable batteries
* 6 cell lead-acid or lead-gel batteries, from 35Ah
quiescent current
* max 0.6mA
off living-area battery
load current of alternator's * approx 0.3A
D+ output by EBL
permissible load on
* maximum current draw up to the fuse rating of each output;
12V outputs
see enclosed block diagram.
