![background image](http://html1.mh-extra.com/html/sanji/dx120-series/dx120-series_user-instructions_3961643001.webp)
U
S
E
R
I
N
S
T
R
U
C
T
IO
N
S
D
X
1
2
0
i
D
X
1
2
0
iH
J
P
G
1
The Dx120 series represents a milestone in affordable vehicle
security design. Sanji have incorporated the most up to date
technology to improve performance and long term reliability.
Manufactured to full international ISO 9001 and SABS quality
standards. Please read these instructions for correct system
operation.
Points marked with the * are applicable to the DX120iHJ
version only
4) ALARM ARMED
MODE
During alarm
armed mode
the dash led
will flash
slowly.
The immobiliser, doors and
ignition are now fully
armed. If a door is opened
or ignition is turned on,
the system will trigger,
siren will sound for 35
seconds, then go back to
alarm armed mode.
Dash led
flashing
slowly
3) ALARM DELAY
PERIOD
The alarm
delay period is
30 seconds.
During the alarm delay
period the dash led will
flash rapidly. The
immobiliser is armed,
however the doors and
ignition are not armed at
this point. After 30
seconds, the dash led will
flash slowly, doors and
ignition are now armed.
Dash led
flashing
rapidly
2) DOOR WARNING
CHIRPS
Door warning
chirps.
When you set the alarm,
if a door is open, you will
get 2 loud chirps warning
the user that a door is
open.
1) SETTING THE
ALARM
to enable the
immobiliser
and full
alarm
features.
Press the double dot
button (right button), the
unit will sound 2 chirps
and the indicators will
flash twice. If fitted with
central locking the doors
will lock.
to reset the
immobiliser
and full
alarm
features.
Press the single dot
button (left button), the
unit will sound 1 chirp
and the indicators will
flash once. If fitted with
central locking the doors
will unlock. The dash led
will go off.
6) RESETTING
THE ALARM
Trip chirps on
reset.
If the alarm tripped when
the user was not present.
When you reset the alarm,
the unit will sound
4 chirps.
7) TRIP CHIRPS
5) ALARM ARMED
CONFIRMATION
To confirm
alarm armed
mode.
Press the double dot
button, the indicators will
flash once to confirm that
the alarm is fully set.