background image

March 25, 2019
©  S&C Electric Company 2014-2019, all rights reserved

Instruction Sheet  695-505

S&C Vista

®

 SD Underground Distribution Switchgear

Outdoor Distribution (17.5 kV and 29 kV)

With Visi-Gap

®

 Load-Interrupter 

Switches and Visi-Gap

®

 

Fault Interrupters

Installation

Table of Contents

Section  

Page

Section  

Page

Introduction

Qualified Persons . . . . . . . . . . . . . . . . . . . . . . . . . . .  2
Read this Instruction Sheet  . . . . . . . . . . . . . . . . . . .  2
Retain this Instruction Sheet. . . . . . . . . . . . . . . . . . .  3
Proper Application  . . . . . . . . . . . . . . . . . . . . . . . . . .  3
Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  3
Warranty Qualifications  . . . . . . . . . . . . . . . . . . . . . .  3

Safety Information

Understanding Safety-Alert Messages . . . . . . . . . . .  4
Following Safety Instructions . . . . . . . . . . . . . . . . . .  4
Replacement Instructions and Labels  . . . . . . . . . . .  4
Location of Safety Labels and Tags

Single-Way Vault-Mounted Style . . . . . . . . . . . . .  5

  Multi-Way Vault-Mounted Style . . . . . . . . . . . . . .  6
  Pad-Mounted Style  . . . . . . . . . . . . . . . . . . . . . . .  7

Safety Precautions

 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Shipping and Handling

Packing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  9
Inspection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  9
Handling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10

Installation

Vault-Mounted Style
  Switchgear Placement . . . . . . . . . . . . . . . . . . . . .12
  Single-Way Vault-Mounted Style Unit 

Installed Through 31½-Inch Manhole . . . . . . . . . .13

 Cables  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
 Grounding 

 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15

  Fault Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . .15
Pad-Mounted Style
  Switchgear Placement . . . . . . . . . . . . . . . . . . . . .16
  Access to Interior . . . . . . . . . . . . . . . . . . . . . . . . .16
 Cables  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
  Attach Hinged Roof Counterweights . . . . . . . . .  20
  Install Termination Compartment 
    Cover Panels . . . . . . . . . . . . . . . . . . . . . . . . . . .21
 Grounding  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21 
  Fault Indicators . . . . . . . . . . . . . . . . . . . . . . . . . .  22
  Closing the Doors and the Hinged Roof  . . . . . .  23
  Completing the Installation . . . . . . . . . . . . . . . . .  24

Appendix A

Routine Switchgear Testing . . . . . . . . . . . . . . . . . . . . . 25
Dc Cable Testing and Fault Locating . . . . . . . . . . . . . . 25
Very Low Frequency (VLF) Cable Testing . . . . . . . . . . 26
Fault-Interrupter Testing . . . . . . . . . . . . . . . . . . . . . . . . 27

Summary of Contents for Vista SD




























Reviews: