background image

Before calling service

ENGLISH

•  Allow your refrigerator to operate and cool down for 24 hours (1 full day) to reach 

to the set temperature.

•  Also, when you put room temperature or warmer food into your refrigerator, it may 

need an additional 24 hours for the fridge to reach the set temperature.

Refrigerator or freezer Compartments are warm

•  Wipe off the condensation with a dry towel (This may occur during hot and humid 

seasons.)

•  If the condensation occurs on the doors, turn off the Energy Saving function.
•  If you open the doors frequently or for too long, it may cause moisture inside the 

fridge.

Moisture forms on outside/inside of refrigerator

•  These  noises  may  be  heard  occasionally  inside  the  refrigerator.  This  is  normal. 

This sound occurs when various items contract or expand while temperatures are 
changing; especially during defrosting. This may also occur when electronic de-
vices including the ice maker are operating.

Noise Clicks, Pops, Cracks, Snaps

•  If food with too much moisture is stored near the cooling vents, it may get frozen. 

Be sure to keep moist food away from the cooling vents.

Food stored in refrigerator is frozen

•  When installing, servicing or cleaning 

behind the refrigerator, be sure of the 
following:

•  To  protect  your  floor’s  finish  when 

moving  the  refrigerator,  cut  a  large 
section of the cardboard carton and 
place  under  the  refrigerator  where 
you are working.

•  Pull  the  unit  straight  out  and  push 

back in straight after finishing.

Moving and Installing

Leveling & Door Alignment

•  Insert  a  flat-blade  screwdriver  into  a 

slot on the control lever, turn it clock-
wise or counter-clockwise to level the 
door.

•  Open the freezer drawer to gain an ac-

cess to the adjustable hinge pin. Next, 
adjust  the  refrigerator  door  using  the 
provided 0.16 inch wrench.

•  If you need to add more height to the 

door, insert the provided snap rings.

DA99-02015A REV(0.0) 

•  Recommended Temp Settings 

: -2°F for freezer and 38°F for refrigerator.

•  Ice off : Press the “

Ice Off

” button to turn the ice making function off.

•  Cooling Off (Show Room) mode : If the Display shows the “

0F 0F

” code, it means 

that the Cooling Off function is activated and the refrigerator is not cooling. To can-
cel this mode, press the 

Power Freeze

 and 

Freezer

 buttons at the same time for 

3 seconds until a “Ding-dong” sound is heard and the unit will now cool.

For details, refer to the user manual “

Using the control panel

Display

Cooling Off mode

Screwdriver

Control Lever

RAISE

Reviews: