CABINE
T INTERNAL WIDTH
CABINET
DEPTH
25301740 / 02-15.07.2009
DD = NL
- 10
DIW={CIW
- 45} ± 0,5
18
DIW = Drawer Internal Width
CIW = Cabinet Internal Width
DD = Drawer Depth
NL = Nominal Length
2
4
6
8
10
Full Extension
Manual
A
B
C
Ø 2
1
3
5
7
9
min.41 mm
250
300
350
400
450
500
550
600
* Use angled holes to mount smart lock when wooden
floor width is selected less then 12 mm.
* Slider hole axises can be drilled by using Smart Drilling Jig.
*Pull the “C” handle to displace drawer.Use “B” nut to adjust left-right and
“A” nut to adjust up and down.
* Drawer can be displaced by pulling the “C” handle.
* Install the drawer according to the dimensions above.
* Determine the cabinet internal width and depth before starting the design of
drawer.
* Drill the slide mounting holes.(Use the Smart Drilling Jig with ruler or Smart
Drilling Jig in order to work of drawer properly.)
* Mounting hole axises were given above according to lenght of slide.
* Screw the slider to the cabinet from the holes shown in figure with
chipboard screw Ø3.5x16.
* Drill the Smart lock fixing holes and drawer back holes
by using lock template.
