background image

Monogram.

Specification Revised 11/99

ZTD910SBSS - GE Monogram 30" Warming Drawer 

For answers to your Monogram,

®

GE Profile Performance Series,

GE Profile

or GE appliance questions, call 

GE Answer Center

®

service, 800.626.2000.

R

Listed by
Underwriters
Laboratories

26"

Including Handle

23-1/4"

30"

10-1/2"

9"

1"

Drawer

Open

27"

Warming Drawer Dimensions (in inches)

1" Min. Above Toekick or Adjust 
to Oven Installation Height

28-1/2"

2" Min.

Allow 5/8"
Overlap on
All Sides

30"

10-1/2"

23-1/4"

23-1/2" Min.

Inside

Oven 

Cutout

9-1/4"

2x2 or 2x4
Anti-Tip Block
Against Rear
Wall, 9" From
Floor to 
Bottom of
Block

9"

Single Oven Installation (in inches)

28-1/2"

2" Min.

Allow 5/8"
Overlap on
All Sides

30"

10-1/2"

23-1/4"

23-1/2" Min.

Inside

1" Min. Above Toekick 

Oven 

Cutout

2x2 or 2x4
Anti-Tip Block
Against Rear
Wall, 9" From
Floor to 
Bottom of
Block

9"

9-1/4"

Double Oven Installation (in inches)

Important Installation Note:

Must provide anti-tip brace at the back of the cabinet and at the top of
the cutout.

Optional Accessories:

JXPN1

–Optional Pan Set Accessory for Warming Drawer.

Five commercial pans with lids (4” deep)
• One large pan (14 quarts)
• Two medium pans (6 quarts each)
• Two small pans (3 quarts each)

ZXD30B

–1/4” wood panel trim kit

Electrical
Outlet 16" Max.
From Left Side.

23-1/2" Min.

25"

1-1/2" Cabinet Top

36"

Countertop

Height

2" Min.*

28-1/2"

9-1/4"

Electrical Outlet 42" Max. 

From Right Side.

Electrical Outlet 
Flush With Side
of Cabinet 7" Max.

9"

Install
2x4 or 2x2
Anti-Tip Block
Against Rear
Cabinet Wall
9" From Floor 
to Bottom
of Block

7"

Undercounter Installation (in inches)

Note:

When installing warming drawer with a cooktop, allow a 2” 

minimum from cooktop burner box bottom to top of cut-out.

Note:

Additional clearance between cutouts may be required.

Check to be sure that oven supports above the Warming
Drawer location do not obstruct the required interior 23-1/2”
depth and 9-1/4” height.

9"

2x4 or 2x2

Runners or Solid Bottom

Install
2x4 or 2x2
Anti-Tip Block 
Against Rear 
Cabinet Wall
9" From Floor 
to Bottom
of Block

Reviews: