HIGH PRECISION OPTICAL FIBER CLEAVER
FC-6S
Instruction Manual
◆
Usage and Safety Regulation
☉
Read this description, before using Cleaver and keep description with
Cleaver .
☉
Using Cleaver, please be cautious of the following particulars and prevent
your body and property from harm and use carefully and usefully.
☉
Keep Cleaver away from water.
☉
Place Cleaver away from humid and dusty place.
☉
High temperature causes transforming, so keep it in normal temperature.
☉
Be careful with serious impact on it.
☉
Be sure that the stripped fiber length should be at least 12mm or longer.
☉
Clean the Cutting Edge Rubber Pad regularly with alcohol. Try not to use
acetone or corrosive solvent when you clean the rubber pad.
☉
Keep
the fiber holder clean to ensure no dust in it
.
◎
Operation Procedure of Products
1.
Open the body cover, and put
the stripped fiber on the v-groove.
And make sure that the cleave
length is set as per operators’
intended length.
2.
Push the Blade Carriage to
the back, then close the
pressing board to fix the
fiber.
3. Close the cover and make
sure that the end of the fiber
is sticking out of the rubber
pad exactly in a straight line.
4. Push the blade carriage to
the front until it stops.
Pressing Board
Fiber Holder
Main Body
Blade
Cutting Edge
Rubber Pad
Blade Carriage
Cover
User Manual
