M1
M2
H20
H20
Alphanumeric
keyboard
Colour screen
button
address-book access
Call acceptance
Direct SMS access
Earpiece
Navigation
Return function
buttons
Recent calls
Validate function
buttons
Access to a voicemail
(long press)
M1:
rapid access button
Call release /
Switch telephone
off/on (long press)
M1 :
rapid access button
Microphone
-
The telephone
-
The mains charger
-
Ni-MH battery
-
The user manual
Presentation of telephone
Contents of pack
1
2
3
Turn the telephone and remove the rear cover. Lift the bottom of the
cover from the notch (1) then lift off the top.
Remove the battery block.
Remove the SIM card holder by pushing it to the left and lifting it
(a)
.
Slide the card into the cover, with the copper elements facing the
telephone and the bevelled corner at the top right
(b)
.
Close the cover by pushing it to the right
(c)
.
Place the battery block
(2)
in its location, then insert the small
connector
(3)
in its housing, taking care to respect the direction of the
wires.
Place the rear cover
(4)
, first hooking the top, then pressing the bottom
down until it closes fully.
a
b
c
Installation
Insertion
direction
1
2
3
4
To recharge the battery :
-
Connect the charger to a mains plug.
-
Place the telephone on its charger.
-
The telephone starts charging and the "moving
battery" image indicates that it is charging.
-
The charge stops itself automatically.
Charging the battery
Press on to switch your telephone on.
If access to the SIM card is protected by a confidential code, the
telephone will ask you to enter the PIN code.
If an incorrect PIN code is entered three times in a row, your SIM
card is blocked.
PIN code
A new battery must be charged for at least 2 hours before it is used for
the first time.
Time/Date settings
During first use, you must set the date and time.
A screen to set the date and time is systematically presented to
you if the battery has been totally discharged or removed.
Go into
Settings
/
Time and date
/
Set time & date
.
Enter the date and the time using the keyboard buttons.
After entering, validate with
OK
.
