Iron Trapper™ Installation & Start-Up Procedures
Congratulations!
You’ve selected our best-selling
well water treatment system for
top performance and economy.
Iron Trapper™ systems reduce
Iron, Hydrogen Sulfide and
Manganese and are designed to
provide years of service with
proper care and maintenance.
Hopefully, this manual will be
beneficial and provide information
you need to install, start-up and
maintain your system.
®2020 Safety Zone Water Systems, LLC
Valve type
Metered
Valve sizes
1”, 1.25”, 1.5” and 2”
Pipe fittings available
¾”, 1”, 1.25” and 1.5”
Filtration procedure
“Air Draw” for oxidation
Riser tube size
1.05”, 1.25”, 1.5” and 2”
Drain line fitting
¾” male NPT
Brine line (for air draw)
3/8” quick connect
Supply voltage
120 V AC
Supply frequency
60 Hz
Output voltage
12 V AC
Filtration media
For Iron, Hydrogen Sulfide & Mang.
By-pass valve
Included
Specifications
How it works!
The Iron Trapper™ utilizes oxygen,
contained in your water and fresh
ambient air injected inside the filter
tank to oxidize Iron, Hydrogen Sulfide
and Manganese, so they drop out of
solution to form particles. These
particles are trapped by the filter
media, and are periodically removed
from the filter during the
backwash
cycle.
Iron Trapper™ systems do not need
chemicals for
oxidation
. However, if
your water contains bacteria, water
treatment chemicals may be required
for
disinfection
.
Proper Well water treatment
Proper well water treatment is based on
what’s in your water. Challenges include
water hardness, Iron, Hydrogen Sulfide
(rotten egg odors), sediment, tannins,
Arsenic, Nitrates, Acidic water (low pH),
bacteria and other harmful
microorganisms.
Iron Trapper™ for Iron &
Hydrogen Sulfide
(Sulfur Odors)
This unique system removes Iron,
Hydrogen Sulfide and Manganese using
our AIR DRAW valve for greater oxidation.
To view our valve manuals visit
