background image

     Self Closing Gate 

 

Models: ST-SCST/NR/EN  

Safetots Limited, Units7,9,10 The Orbital Centre, Gunnels Wood Road, Stevenage, SG1 2NB, UK 

+44 1438 728888 

www.safetots.co.uk 

[email protected] 

I.1 scgsb 04.19

 

INSTRUCTIONS 

IMPORTANT!  READ AND 
FOLLOW THESE 
INSTRUCTIONS 
CAREFULLY AND KEEP 
FOR FUTURE REFERENCE 

 

Please read the instructions and warnings carefully before use. Your children’s safety is your 

responsibility. 

 
WARNING: 

Incorrect installation can be dangerous. 

WARNING: 

Do not use the safety barrier if any components are damaged or missing. 

WARNING: 

This safety barrier must not be fitted across windows. 

WARNING: Never use without wall cups. 

 

Additional Information 

Adjusts to fit openings 

 Self Closing Gate Extra Narrow (61cm to 66.5cm), Self Closing Gate Narrow (68.5cm to 75cm) 

Self Closing Gate Standard (75cm to 82cm).  
 
This safety barrier is made from steel and has an automatic closing system.  When fitted as instructed, this product conforms to BS EN 1930:2011.  
This safety barrier is for domestic use only.  Always check that the safety barrier is correctly closed. 
This product has been designed for use with children up to 24 months of age, however this is dependent on individual development, and it may be 
appropriate to stop using at a younger age. For example, stop using the barrier once your child is capable of climbing it.  This safety product will 
not necessarily prevent all accidents and so be aware of hazards associated with children of all ages using or climbing over it. Never permit children 
to swing on the moving section, and when operating the gate be mindful of the risk of trapping small fingers or limbs. Sharing these instructions 
with all other users will support safe operation. 
 

POSITIONING THE SAFETY BARRIER 

 

You must install your safety barrier in a strong and secure opening and ensure the surfaces are dry, solid and clean.   
When using the adhesive pads to secure the wall cups, apply pressure to the sticky pads for 1 minute to assist the development of adhesives and 
bond strength. In the event of any movement to the wall cups thereafter the use of wall screws is required.  Make sure to use the appropriate type 
of fixings depending on the surface available: wooden screws for wooden surface, multi-use plug and concrete screw for concrete surface, 
plasterboard wall plug and screw for plasterboard surface, metal screw for metal surface. 
 

CLEANING & MAINTENANCE RECOMMENDATIONS: 

To clean, wipe with a damp cloth and dry thoroughly. Do not use abrasive or aggressive cleaning agents because they can be detrimental to the 
health of your child and can affect the finish of the product.  The barrier should be checked regularly to ensure that it is secure and functioning in 
accordance with these instructions. Routinely check the safety barrier to ensure that equal pressure is still retained across all 4 spindles.  Careless 
handling may cause damage.  Additional or replacement parts should only be obtained from the manufacturer or distributor. 

 

PRODUCT GUARANTEE 

We want you to be 100% satisfied with your purchase.  Our products pass the relevant safety standards and offer great value for money.  
Furthermore, we offer a one-year 

manufacturer’s guarantee (please retain proof of purchase).  If for any reason you are not satisfied with your 

product, please contact our Customer Service team. 

 

*A - When used at the top of the stairs, it should not be 
positioned below the top level.  When the safety barrier 
is used at the top of the stairs, the gate should open 
towards the landing and away from the stairwell. 
**B - When used at the bottom of the stairs it should be 
positioned at the front of the lowest tread possible.

 

Summary of Contents for ST-SCST

Page 1: ...HE SAFETY BARRIER You must install your safety barrier in a strong and secure opening and ensure the surfaces are dry solid and clean When using the adhesive pads to secure the wall cups apply pressure to the sticky pads for 1 minute to assist the development of adhesives and bond strength In the event of any movement to the wall cups thereafter the use of wall screws is required Make sure to use ...

Page 2: ...s which may present a choking hazard Lay out the parts on a soft level surface and compare to the parts checklist Do not throw away any packaging until you are sure that you have all the parts Additional gates panels and spare parts are available at www safetots co uk ASSEMBLY INSTRUCTIONS DON T CUT TIE Twist HANDWHEELS onto SPINDLES x 4 Twist to end of SPINDLE x 4 Slot into GATE x 4 Add WALL CUPS...

Page 3: ... against wallpaper or uneven surfaces When using the adhesive pads to secure the wall cups apply pressure to the sticky pads for 1 minute to assist the development of adhesives and bond strength USE SCREWS IF THERE IS ANY MOVEMENT TO WALL CUP Twist HANDWHEELS to close frame to 1 2MM Set equal pressure on all 4 SPINDLES CUT tie GATE is READY TO USE Assembly video available at www safetots co uk TO ...

Page 4: ...écessite de lubrifiant Nettoyez la barrière avec un chiffon humide et un détergent doux N utilisez pas de produits abrasifs ni produits javellisant ni outils pointus pour nettoyer votre barrière IT IMPORTANTE SEGUIRE CON CURA LE PRESENTI ISTRUZIONI E CONSERVAR LE PER UN UTILIZZO FUTURO AVVERTIMENTO Non utilizzare mai senza le ghiere da parete AVVERTIMENTO Montaggio o posizionamento incorretti di q...

Reviews: