Revisions to the design reserved
Setting up a line of fencing without steps
2
Pre-mounting a hook bolt
patented
1
Assembly of RP-pur at the correct height and in line
Assembly of the LEGI tubular post
RP pur at the correct height and in
line with a spacing of 2500 mm.
It must be observed that the side of
the tube with the 9 mm hole is the
grating side (front).
2500 mm
threaded end
bore-side
grating receiver
Insert the hook bolt M8 x 65 in the
9 mm hole in the front of the
LEGI post RP pur R. Screw on
an 8 mm special hexagonal nut
through the 27 mm hole from the
rear (an 8 mm shear nut + spacer
sleeve can also be used optionally)
by approx. 3 – 4 threads.
An extended 13 mm box wrench or
similar tool is most suitable for this.
Alternatively, the LEGI pur assem-
bly aid, can be used, on which the
gratings can be hung.
Caution:
The size of the assembly aid depends
on the cross-section of the post, which
varies with the height of the fence.
www.legi.de
1
R pur
Assembly Instructions
LEGI fence system
