background image

Please Read and Save this Use and Care Book.

IMPORTANT

 SAFEGUARDS

When using 

electrical appliances, 

basic safety 

precautions should 

always be 

followed, including the 

following:

 Read 

all instructions.

 Do not 

touch hot 

surfaces. Use 

handles or knobs.

 To protect 

against fire, electric 

shock and 

injury to persons do 

not immerse 

cord, plugs or appliance 

in water 

or other liquid.

 Close supe

rvision is necessary when 

any appliance

 is used by 

or 

near children

.

 Unplug 

from outlet 

when not 

in use 

and before cleaning. 

Allow to cool before putting on or taking 

off parts, 

and before 

cleaning the 

appliance.

 Do not 

operate any 

appliance with 

a damaged 

cord or plug, 

or 

after the 

appliance malfunctions 

or has been 

damaged in 

any 

manner . R

eturn appliance 

to the nearest 

authorized service 

facility for 

examination, repair 

or adjustment. Or

, call 

the 

appropriate toll-free numb

er on the cover of this 

manual.

 The 

use of accessory attachments 

not recommend

ed by the 

appliance manufacturer 

may result 

in fire, electric 

shock or 

injury to persons.

 Do not 

use outdoors.

 Do not 

let cord hang 

over edge 

of table or counte

r , or touch 

 

hot surfaces.

 Do not 

place on or near

 a hot 

gas or electric burn

er , or in 

heated oven.

 Always 

attach 

plug to appliance 

first, then plug 

cord into 

the wall 

outlet. To disconnect, 

turn any 

control to OFF , then 

remove plug from 

wall outlet.

 Keep 

lid on carafe 

when in 

use.

 Do not 

use this 

appliance for 

other than 

intended use.

SAVE THESE 

INSTRUCTIONS.

This product is for household use only.

POLARIZED PLUG (120V Models Only)

This appliance has a polarized plug (one blade is wider than the other). To 

reduce the risk of electric shock, this plug is intended to fit into a polarized 

outlet only one way. If the plug does not fit fully into the outlet, reverse the 

plug. If it still does not fit, contact a qualified electrician. Do not attempt to 

modify the plug in any way.

TAMPER-RESISTANT SCREW

Warning: This appliance is equipped with a tamper-resistant screw to 

prevent removal of the outer cover. To reduce the risk of fire or electric 

shock, do not attempt to remove the outer cover. There are no user-

serviceable parts inside. Repair should be done only

 by authorized service 

personnel.

ELECTRICAL CORD

a) A short power-supply cord is to be provided to reduce the risk resulting from 

becoming entangled in or tripping over a longer cord.

b) Longer extension cords are available and may be used if care is exercised in 

their use.

c) If an extension cord is used,

 

1) 

The marked electrical rating of the cord set or extension cord should be  

 

 

at least as great as the electrical rating of the appliance, and

 

2) 

The cord should be arranged so that it will not drape over the 

countertop or tabletop where it can be pulled on by children or tripped over  

 

 

 unintentionally. 

 

3) 

If the appliance is of the grounded type, the extension cord should be a  

 

 

grounding-type 3-wire cord.

Note: If the power-supply cord is damaged, it should be replaced by qualified 

personnel; in Latin America, by an authorized service center.

Proper precautions must be taken to prevent the risk of burns, fires, 

or other injury to persons or damage to property. Keep hands and face 

clear of the area above the Kettle.
11.  Remove the kettle from the power base before pouring the water.
Caution: Always make sure the kettle is Off (0) before removing it from 

the power base.
Caution: To avoid a risk of splashing, make sure the lid is securely 

closed onto the kettle before pouring the water. Pour slowly and don’t 

over-tilt the kettle.
Caution: Do not touch hot surfaces! When you lift the kettle from the 

power base you may notice moisture on the power base surface. This 

is the steam used to switch the kettle Off (0) automatically, which then 

condenses and escapes through the vents in the underside of the kettle. 

This is normal and should be ignored.
12.  Unplug the power base from the electrical outlet when not in use. 

Allow it to cool before reuse. 

13.  Empty the kettle after each use. 
Important: Do not leave water in the kettle overnight.
14.  For cleaning instructions, go to the CARE AND CLEANING section.

REHEATING WATER IN THE KETTLE
1.  To reheat water in the kettle, check the water level. 
Caution: When refilling, take care when lifting the lid, as the kettle, 

if hot, may be full of steam. Keep your face, hands, etc. clear of the 

opening.
2.  If necessary, add more water, and then place kettle back onto the  

power base. 

Caution: Do not fill above the MAX level as indicated by the lever inside 

the kettle. If filled above the MAX level it could cause boiling water to 

splatter out.
Note:
 Be careful not to spill any water onto the power base. 
3.  Press On/Off (I/0) lever down, into the On (I) position. The indicator 

light will come on.

4.  When the water comes to a boil, the kettle will automatically shut off 

and the indicator light will turn off.

5.  Remove the kettle from the power base before pouring the water.
Caution: Always make sure the kettle is Off (0) before removing it from 

the power base.
Caution: To avoid a risk of splashing, make sure the lid is securely 

closed onto the kettle before pouring the water. Pour slowly and don’t 

over-tilt the kettle.
6.  Unplug the power base when not in use. Allow it to cool before reuse. 
7.  Empty the kettle after each use. 
Important: Do not leave water in the kettle overnight.
8.  For cleaning instructions, go to the CARE AND CLEANING section.
BOIL-DRY PROTECTION
A safety thermostat will automatically operate should your kettle be 

accidentally plugged in without any water, or if the kettle is without 

sufficient water, or if the kettle is allowed to boil dry. The boil-dry 

protection device will automatically turn the kettle Off (0).

Important: To reset the boil-dry protection device, you must remove the 

kettle from the power base and allow it to cool before refilling with water.

CARE AND CLEANING

This product contains no user-serviceable parts. Refer service to qualified 

service personnel.
Caution: Do not immerse kettle or power base in any liquid. Do not place 

kettle, scale filter or power base in the dishwasher for cleaning.
1.  Make sure the kettle is turned Off (0).
2.  Unplug the power base from the electrical outlet. 
3.  Allow the kettle and power base to cool before cleaning.

CLEANING ELECTRIC KETTLE
1.  Raise the On/Off (I/0) lever into the Off (0) position. Allow kettle to cool  

before cleaning.

2.  Open the lid.
3.  Remove the scale filter from inside the kettle.
4.  Rinse the scale filter under running water and use a soft brush if necessary. 
Note: Do not use a metal brush.
5.  Place scale filter back into position.
6.  Rinse the inside of kettle with water and wipe the outside with a damp 

cloth.

Note: Do not use highly corrosive or abrasive cleaning agents or brushes.
7.  Dry the outside of the kettle with a soft cloth or paper towel.

CLEANING KETTLE WITH VINEGAR
Note:
 Mineral deposits can form a coating inside the kettle and may cause an 

off flavor in the water or lengthen the boiling time.
Use the following cleaning method:
•  In a bowl, mix a diluted solution of one part vinegar to four parts water and 

pour into kettle. 
Important: Do not boil the solution in the kettle, as it may damage the 

kettle.

•  Allow the solution to soak in the kettle for 30 minutes. 
•  Then clean with a soft, non-abrasive brush.
•  Empty out solution. 
•  Fill the kettle with clean water and rinse thoroughly several times.

CLEANING POWER BASE
1.  Wipe the power base unit with a damp cloth.
2.  Dry with a soft cloth or paper towel.

Product may vary slightly from what is illustrated.

 1.

 Tab

† 2.

 Lid (Part # 31480)

† 3.

 Scale filter (Part # 31481)

 4.

 Handle

 5.

 1.7 L electric kettle 

 6.

 On/Off (I/0) lever 

 7.

 Power indicator light

† 8.

 Power base with cord (Part # 31482)

 9.

 Power 

cord

 10.

 Polarized 

plug

 11.

 Connector

  12.

 MAX (maximum) water level

  13.

 Filter guides (inside kettle)

Note: † indicates consumer replaceable/removable parts

HOW TO 

USE

This product is for 

household use 

only .

PRELIMINARY STEPS

• Boil

 water

 in

 the

 kettle

 by

 fo

llowing the

 OPERA

TING INSTRUCTIONS

 

below. Discard 

the water

.

• See

 the

 CARE

 AND

 CLEANIN

G section

 for

 instructions

 on

 how

 to

 clean

 

the kettle 

and scale 

filter .

• Make

 sure

 the

 power

 cord

 is

 unplugged

 and

 the

 On/Off

 (I/

0) lever

 is

 in

 

the Off 

(0) position.

• W

ipe the

 power

 base

 clean

 with

 a 

moistened cloth.

 Dry

 thoroughly

.

OPERATING 

INSTRUCTIONS

CAUTION: Do not 

immerse kettle, 

power base, 

power cord, or polarized 

plug in water or 

any other liquid.

ELECTRIC KETTLE

1. Place 

power base on a 

level surface such 

as a 

countertop or table. 

The 

power base must 

be dry befor

e use.

Caution: To prevent 

plasticizers from migr

ating from 

the finish of the 

countertop, tabletop or 

other furniture, place 

NON-PLASTIC coasters 

or 

placemats between the power 

base and the finish of the countertop 

or 

tabletop. Failure to 

do this may cause 

the finish to darke

n, permanent 

blemishes may occur or 

stains can appear

.

2. Raise 

the On/Off (I/0) 

lever from the 

kettle into 

the Off

 (0) position.

3. R

emove kettle 

from the 

power base 

by lifting 

it up.

4. Open 

the lid. 

5. Fill the 

kettle with 

the desired 

amount of water

Caution: Do not 

fill above the MAX level as indicated by the lever inside 

the kettle. If filled 

above the MAX level it could 

cause bo

iling water to 

splatter out.

6. P

ress down on the 

lid until 

it snaps 

into place. 

Dry the excess water 

from the 

kettle with 

a soft cloth 

or paper towel.

Caution: To avoid the risk of splashing 

hot water

, make su

re the lid is 

securely closed 

onto the kettle before 

operation.

7. Place 

the kettle 

on the power base, 

engaging the 

connector into 

the 

bottom of the 

kettle. 

Note: Be 

careful not 

to spill any 

water onto the 

power base.

8. Insert 

the polarized plug 

into an electrical 

outlet.

9. P

ress the On/Off (I/0) 

lever from the 

kettle downwards, 

into the 

On (I) 

position. The 

indicator light 

will come 

on.

Note: If the 

kettle 

is accidentally 

switched On 

(I) without 

sufficient water

a boil-dry 

protection device 

will automatically 

turn the 

unit Off 

(0)  

(see BOIL-DR

Y PROTECTION).

10.  

When the 

water comes to a 

boil, the kettle 

will aut

omatically shut 

off and 

the ind

icator light 

will turn off.

Note: The 

kettle can 

be turne

d Off (0) 

at any 

time during 

the heating 

process by pressing 

the On/Off (I/0) 

lever to the 

Off (0) 

position.

Warning: 

This appliance gener

ates heat and escaping steam during 

use. 

2011/5-12-68E/S

© 2011 Applica Consumer Products, Inc.

M

AX

(     )

(   )

OFF

ON

1.7 L Brushed Stainless  

Steel Electric Kettle 
Hervidor eléctrico de acero 

inoxidable cepillado de 1.7 L

Model/Modelo

   RH13552

Made and Printed in People’s Republic of China.

NEED HELP?
For service, repair or any questions regarding your appliance, call the appropriate 

800 number on the cover of this book. DO NOT return the product to the place of 

purchase. Also, please DO NOT mail product back to the manufacturer, nor bring it 

to a service center. You may also want to consult the website listed on the cover of 

this manual.
Three-Year Limited Warranty  

(Applies only in the United States and Canada)
What does it cover?
• Any defect in material or workmanship provided; however, Applica’s liability will 

not exceed the purchase price of the product.

For how long?
• Three years after the date of original purchase.
What will we do to help you?
•  Provide you with a reasonably similar replacement product that is either new or 

factory refurbished.

How do you get service?
•  Save your receipt as proof of date of sale.
•  Check our on-line service site at www.prodprotect.com/applica, or call our toll-

free number, 1-800-231-9786, for general warranty service.

•  If you need parts or accessories, please call 1-800-738-0245.
What does your warranty not cover?
•  Damage from commercial use
•  Damage from misuse, abuse or neglect
•  Products that have been modified in any way
•  Products used or serviced outside the country of purchase
•  Glass parts and other accessory items that are packed with the unit
•  Shipping and handling costs associated with the replacement of the unit
•  Consequential or incidental damages (Please note, however, that some states do 

not allow the exclusion or limitation of consequential or incidental damages, so 

this limitation may not apply to you.)

How does state law relate to this warranty?
• This warranty gives you specific legal rights, and you may also have other rights 

that vary from state to state or province to province.

Customer 

Care

 

Line:

 

USA 1-800-231-9786

Accessories/Parts 

(USA) 

1-800-738-0245
For 

online customer service  

and to 

register

 your product, go to

 

www.prodprotect.com/applica

Servicio 

para el cliente:

 

México 01-800 714-2503

Accesorios/Partes 

(EE.UU) 

1-800-738-0245
Para

 servicio al cliente

 y para 

registrar 

su garantía, visite 

www.prodprotect.com/applica

Reviews: