Operating instruction for the
electronic-lock LETTERA
!!CAUTION!!:
Please read this operating instruction carefully,
before operating the lock or trying to tailor a new combination
of numbers. We do not assume any liability
caused by functional disorder as a result of faulty switch
over or due to use of violence or improper use by the operator.
Neither do we assume any responsibility for damage
caused, nor for loss of property which could be put
down i.e. to the not proper interlocking of the safe.
1. Inserting the batteries.
1.1
You will have to insert four [4] pieces of 1,5 volt
batteries (batteries are NOT included in the scope of delivery/supply)
1.2
Remove the battery cover on the right side of the
electronic system and insert the batteries.
1.3
Make sure that the batteries were inserted properly.
The correct functioning of the LETTERA will now be examined
1.4
After checking, first 0 [zero] and than < GOOD > will appear on the display.
2.
Opening the safe after inserting the batteries.
2.1
For the first-time opening of the safe, please press the < START > button .
2.2
The Display shows < - - - - - - - >
2.3
You will now be able to enter one of the two the factory codes:
0-0-0-0-0-0 (user code)
or
8-8-8-8-8-8 (master code).
2.4
Now the green LED flashes.
2.5
Turn the handle to the right to open the safe (please proceed within a four [4] seconds time
duration).
