LUMEN AVANT
Installation Manual
PCW-1218A-EU(12010)
Thank you for purchasing this product.
●
Carefully read this Installation Manual to install
the product correctly.
●
Be sure to test operation after installation has
been completed.
●
B e s u r e t o p a s s t h i s I n s t a l l a t i o n M a n u a l ,
User ’s Manual and Warranty Certificate to
customers. When passing these to customers,
explain the operation method.
CAUTION
Representing product No.
811341000
811341092
Observe Safety Precautions for Safety!
These safety precautions are essential for safe installation and use of the product.
Please read the precautions thoroughly before installing the product.
WARNING
Indicates a potentially
hazardous situation which,
if not avoided, could result
in death or serious injury.
CAUTION
Indicates a potentially hazardous
situation which, if not avoided,
may result in minor or moderate
injury or damage to other property.
Explanation of Hazard Symbols
Checking Power Supply
Follow the instructions below when performing wiring and installing the outlet.
Consign wiring work to an electrician
.
●
Use an
outlet with both a grounding terminal and grounding electrode
, and suitable for
220–240 VAC
with a
maximum
rating of 600W
. (For a toilet bowl with heater, 34W is added to the maximum rating.)
If the outlet is not equipped with a grounding electrode or grounding terminal, replace it with the required one. In addition,
when using the toilet bowl with a heater or using this product with other electrical appliances, prepare the required number of
outlets.
Be sure to connect the grounding lead of the shower toilet to the grounding terminal.
●
Install the outlet in a position as high above the floor as allowed by the length of the cords to avoid exposure to splashing
water. The length of the power cord and grounding lead is 1.0 m.
* Do not insert the power plug into the outlet until installation is completed. Failure to observe this may cause malfunction of the product.
Water Pressure
●
The minimum operation water pressure is 16 L per minute, and at least 0.1 MPa (1.0 kgf/cm
2
) when flowing. The
maximum water pressure is 0.75 MPa (7.6 kgf/cm
2
).
When using other appliances simultaneously, water pressure of at least 0.1 MPa (1.0 kgf/cm
2
) is required. If the minimum
water pressure is less than this value, the ideal washing performance may not be obtained.
Use the special device (CWA-44) to measure the water pressure.
●
The above water pressure cannot be obtained if the pipes are 10A or less. Use pipes of 15A (13 mm) or more.
WARNING
Do not allow any anyone except an
authorized service technician to disassemble,
repair or modify this product.
* Electric shock, fire, or injuries may result.
DO NOT
DISASSEMBLE
Connect the grounding lead to the grounding terminal.
* Not connecting this or inappropriate connection
may cause electric shock or fire.
* If the outlet is not equipped with a grounding terminal,
consult an electrician.
GROUND
Do not pour water or cleanser onto the body
or the power plug.
* Electric shock or fire may result.
DO NOT WET
Do not install the product in locations subject
to high humidity, such as a bathroom.
* Electric shock or fire may result.
DO NOT USE
NEAR WATER
Do not use any loose outlet or an ungrounded
outlet.
* Electric shock or fire may result.
PROHIBITED
Do not connect the product to any water
source other than tap water.
* The inside of the product may be corroded,
causing an electric shock, fire or skin inflammation.
PROHIBITED
Do not remove or insert the power plug with
wet hands.
* Electric shock may result.
NO WET HANDS
●
Do not use the product with any power
supply other than 220–240 VAC.
●
Do not plug any other appliances into the
same power outlet.
* Fire may result.
PROHIBITED
Do not nick, damage, carve, bend unduly, pull,
twist or bind the power cord, place any heavy
object on it, or pinch the power cord between
any objects.
* The power cord may be damaged, causing electric shock or fire.
PROHIBITED
Firmly insert the power plug into the outlet.
* Electric shock or fire may result.
OBSERVE
Install the product correctly according to the
Installation Manual.
* Electric shock, fire, or injuries may result.
* Water may leak, resulting in water flooding over the floor.
OBSERVE
CAUTION
●
When removing the strainers, be sure to
close the water shutoff valve.
●
When attaching the strainers, tighten these
completely so that there is no clearance.
* Water may leak, resulting in water flooding over the floor.
OBSERVE
Flush any foreign matter and rust in the pipes
completely before connecting the product.
* Damage inside the product may cause water
leakage, resulting in water flooding over the floor.
OBSERVE
If freezing weather is anticipated before
handing the product to the customer, drain
water and leave it.
* Damage from freezing may cause water leakage,
resulting in water flooding over the floor.
OBSERVE
Be sure to adjust the water shutoff valve and
check for water leakage after installation.
* Water may leak, resulting in water flooding over
the floor.
OBSERVE
Before Mounting Body
Mount the toilet bowl before mounting the body.
Do Not Place Body on Floor!
Never place the body on the floor.
Secure Water Supply Pipe!
Firmly secure the
water supply pipe
to prevent any looseness.
* Abnormal noise or water leakage may result.
Minimum Installation Clearance
The space required for installing the toilet is as shown in the figure below.
* Secure at least 70 mm space on both the left and right of the
product when viewed from the front.
Be sure to connect the water supply parts to the household water supply line.
Using intermediate, industrial or well water will affect the durability of electrical and mechanical parts, resulting in accidents.
Water Supply
Checking Parts
(check inside the package)
Body
Decorative
panel (right)
Screws
Bolts
Installation manual
Decorative
panel (left)
Wood screws
Plastic anchors
Remote control
Batteries
(2 pcs.)
Bracket
* The bracket is attached to
the rear of the remote control.
Slide it off to remove it.
Names of Parts
Toilet lid
Body
Top cover
Toilet seat
Water shut off valve
Power plug
(with ground
fault protector)
Open/close handle
Water supply hose
Grounding lead
Toilet bowl
Seat sensor
Nozzle (for posterior)
Nozzle (for bidet)
Washer
Anchor Nuts
Instruction manual and
other documents
1190 or more
460
400 or more
700 or more
(mm)
790
70 or more
Top cover
*
Attached to the body
70 or more
The new water supply hose supplied with
this product are to be used and old hose-sets
should not be used.
OBSERVE
