Repairs – Rentals
Field Service
215 Clinton Road
New Hartford, NY 13413
Tel: +1 315 768 4855
Fax: +1 315 768 4941
Email: [email protected]
Revision F
Page 1 of 21
INSTRUCTION MANUAL IM‐293
For Hydraulic Pump Kits used with Gas and
Steam Turbine’s Hydraulic Tensioners
Applicable Riverhawk Part Numbers
MP‐0130 Manual Hydraulic Pump Kit
MP‐6809 Manual Hydraulic Pump Kit
AP‐0532 Air‐Driven Hydraulic Pump Kit
AP‐6048 Air‐Driven Hydraulic Pump Kit
Applicable GE Ordering Sheet Part Numbers
No Specific Ordering
Sheet Part Numbers
GE Power & Water
GENERAL ELECTRIC COMPANY
MLI:
____ OF ____
DATE
CUSTOMER'S INFORMATION BOX
CONTENTS ARE INDEPENDENT OF RIVERHAWK DOCUMENT CONTROL
ISSUED:
THIS DOCUMENT SHALL BE REVISED IN ITS ENTIRETY. ALL SHEETS OF THIS DOCUMENT ARE
THE SAME REVISION LEVEL AS INDICATED IN THIS VENDOR SUPPLIED DRAWING APPLIQUE.
REV
373A4058
GE DRAWING NUMBER
VENDOR SUPPLIED
THIS DOCUMENT IS FILED UNDER THE GE DRAWING NUMBER.
GE NOT TO REVISE. GE REVISION LEVEL IS SHOWN ON THIS APPLIQUE.
GE SIGNATURES
CHECKED:
The Riverhawk Company reserves the right to update this document without dissemination or notice. The
latest revision may be obtained by contacting Riverhawk Company or thru www.riverhawk.com.
