DAW-3
(Receiver),
DAW-5
(Transmitter)
Thank you for buying this RITS-N Wireless Touch Switch. This product is a set of wireless transmitter/receiver switches to be installed in the
equipment requiring relay contact input
to control motor e.g., of automatic door
.
1 Component & Specifications
DAW-5(Transmitter)
DAW-3(Receiver)
Double-sided adhesive tape
1EA
Power connection wire(black, red)
2 pieces
Two kinds of screws (3*8, 4*16)
2EA each
Output contact wire(green, green)
2 pieces
Batteries 3V(COIN BATTERY) CR2450
2EA
Fixing screws (4*16)
2EA
C
om
po
ne
nts
User’s Manual
1 copy
User’s Manual
1 copy
Power supply
3V *2 (TYPE : CR2450)
Power supply
AC220V or AC/DC12V~40V
Rated frequency
FM 447.600MHz
Relay contact capacity
0.5A / 125VAC , 2A / 30VDC
Operating temp.
-10
℃
~ 60
℃
Reception sensitivity
-100 dBm (TEM CELL)
Distance 10m
-
-
Power consumption
9mA -
-
Sp
ec
ific
ati
on
s
Thickness 13mm
-
-
2 How to Install Wireless Touch Transmitter Switch
(DAW-5)
Wireless touch switch
(DAW-5)
Double-sided adhesive
Double-sided adhesive
Tempered
Wireless touch switch
(DAW-5)
☞
Procedures
①
Input DAW-5(wireless touch switch) into your
receiver. (Input method: while pressing and
holding the S/W Input Button on the receiver,
press and hold the Wireless Touch Switch for
about six seconds.)
②
Attach double-sided adhesive tape to the
assembled wireless touch switch.
③
Fix the wireless touch switch on the tempered
glass or on the desired place to be installed.
Type Registration Certificate No. : R-LARN-02-0264
RITS-N CO., LTD.
