1-
Clear sharp sticks and rocks from the ground.
2-
Open the carry bag and remove the tent.
3-
Unclip the buckle strap that holds the tent closed (Fig 1).
5-
Stake the (6) loops around the base of the tent (Fig 3).
6-
Stake the (3) guy lines of the tent (Fig 4).
4-
The tent will unfold by itself into the ready-for-use posi-
tion (Fig 2).
Set Up The Tent
Take Down The Tent
7-
Adjust the guy lines so that the tent will keep its shape
in the wind.
8-
Open the condensation vent (Fig 5).
NOTE:
A ground tarp and rain fly are not required.
1-
Pull out the (9) stakes and place them in the stake bag.
2-
Wipe the bottom of the tent clean. Make sure the tent is
vented to allow air to escape when folding it.
3-
Bring all (4) frame pieces together and hold them with
one hand (Fig 6 and 7).
4-
Turn the tent to the vertical position with the buckle strap
on the bottom half (Fig 8 and Fig 9).
5-
Twist the top half of the tent with your other hand until
it is flat (Fig 10).
Fig 5
Fig 4
Fig 3
Fig 2
Fig 6
Fig 7
Fig 1
Fig 8
Fig 9
Fig 10
Pop Up Tent Set Up Guide
Buckle
Strap
Buckle
Strap
CAUTION: DO NOT USE EXCESSIVE FORCE
WHEN TAKING DOWN THE TENT.
The tent should fold and bend easily. If one of
the steps becomes difficult, back up a step and
review the instructions.
