![background image](http://html1.mh-extra.com/html/ridgid/of50150ts-mobilair/of50150ts-mobilair_replacement-instructions_1457852001.webp)
OF50150TS AIR FILTER REPLACEMENT INSTRUCTIONS
Installing the High Flow Filter
See Figures 1 - 2.
Turn the air compressor off and disconnect it from the
power supply.
Remove the easy start filter and adaptor by turning
counterclockwise.
NOTE:
Use a 1 in. box wrench if needed.
Insert the high flow filter into the air inlet opening.
NOTE:
Do not use thread seal tape.
Turn clockwise to tighten.
Installing the Easy Start Filter
See Figures 3 - 5.
Turn the air compressor off and disconnect it from the
power supply.
Remove the high flow filter by turning it counterclock-
wise.
NOTE:
Use a 23 mm box wrench if needed.
If the adaptor is not installed on the easy start filter,
install the adaptor and tighten.
NOTE:
Do not use thread seal tape.
Insert the easy start filter and adaptor into the air inlet
opening.
Turn clockwise to tighten.
Fig. 1
Fig. 3
Fig. 2
Fig. 4
Fig. 5
REMOVE THE EASY START FILTER
REMOVE THE HIGH FLOW FILTER
INSTALL THE ADAPTOR
INSTALL THE EASY START FILTER
INSTALL THE HIGH FLOW FILTER