background image

Ride Decaf JAVA

®

  

Adjustable Back Support

Owner’s Handbook

Warranty Policy

Installation and Use Instructions

toll-free: 866.781.1633

phone: 303.781.1633

www.ridedesigns.com

Ride Designs

®

a branch of Aspen Seating, LLC 

4211- G South Natches Court

Sheridan, Colorado 80110

®

Warranty Policy

Your Ride Designs

®

 Decaf JAVA

®

 Adjustable Back Support has been carefully 

constructed to meet your posture and skin integrity needs. This Limited 

Warranty is effective for 24 months from the date of delivery to the 

original purchaser. If any defect in material or workmanship is found,  

Ride Designs will repair or replace the component, at our discretion. 

This limited warranty does not cover daily wear and tear or damage that 

is a result of mishandling, misuse, neglect, or not following the care and 

maintenance instructions. 
Claims and repairs should be processed through your nearest authorized 

Ride Designs rehab technology supplier. A copy of the Bill of Sale issued to 

the purchaser of the product might be required prior to processing a 

warranty claim. 
Maximum client weight capacity is 200 pounds.

Summary of Contents for Decaf JAVA Adjustable Back Support













Reviews: