![background image](http://html1.mh-extra.com/html/resolution/cryptix-pinpad-re652-series/cryptix-pinpad-re652-series_install-manual_1444779001.webp)
RE652 Series CryptiX™ PINPad™
Mounting Screw Holes
VHB Tape
VHB Tape
PINPad
is a simple arming station that allows local
control of the Helix panel. It is battery powered and
requires no installation tools. Many can be installed
throughout the home to provide convenient system
control.
Features
• Secure 4 to 10 digit disarming
• Supports 1-button arming
• Small yet comfortable
• 5 year warranty
Enroll
by placing the panel into wireless enrollment
mode and then sending an enrollment signal from the
PINPad. Alternatively, the PINPad can be enrolled
by scanning its bar code using the HeliLink app or
by entering its 8-character serial number on the
interactive service provider’s web portal.
Option for sending an Enrollment Signal
• Press
1
and
3
buttons simultaneously
Install
using the 3M VHB® tape on the back of the
PINPad to adhere it to a wall.
• See Pro Tips for recommendations about using
3M VHB
tape.
• Two #4 or #6 screws may be used instead of,
or in addition to, the 3M VHB tape.
Operate
using the PINPad buttons. The PINPad LED
will blink when a button is activated.
Disarm
by entering a valid 4-10 digit user code on
the number pad.
Arm Away
by pressing the
AWAY
button until the
PINPad LED flashes red.
Arm Stay
by pressing the
STAY
button until the
PINPad LED flashes red.
Trigger a panic alarm
by pressing the
STAY
&
AWAY
buttons together until the PINPad LED
flashes red.
Enrollment Buttons
Arm Stay
Arm Away
PINPad LED
Use the Helix installation guide to verify proper system setup.
IN
STALL
G
U I D E
I