www.resi-linx.com
F
G
LCD Display
IR LED
Scroll up / down
Enter Button (OK)
LED Indicator Input
A
B
C
D
H
Face Plate
Connections
IR
RL-DM1000
®
A
B
C
D
IN
Video
Audio L
Audio R
OFF ON (REMOTE) PWR
IR REPEATER
REMOTE SET UP
ASI IN
DC 12V
ANT IN
RF OUT
Video and Audio Input
Not Active
IR Repeater
Remote Power Switch
Screw Holes for Mounting brackets
12V DC Power Input
Not Active
RF Output
Antenna Input
LED Indicator Input
A
B
C
D
E
I
E
WARRANTY
Vcomm Pty Ltd states that the warrant that the customer can rely on is that
provided by the manufacturer. In the event of any warranty claim please
contact us and we will forward it to the manufacturer. The manufacturer will
then determine the extent of their liability. This expressly negates, to the
extent possible by Australian law, any warranty reliance on Vcomm Pty Ltd.
Vcomm Pty Ltd
ABN: 99 091 281 524
N15275
RL-DM1000
Radio Frequency Range
DVB-T Single Input Digital IR Modulator
complete with 12V DC 3A Power Supply
Connections
Face Plate
Hardware Connection
1. Connect the RCA cable from the video source (eg.
CABLE / PAY TV, DVD, VCR, CAMERA) to the yellow
RCA video ‘INPUT’ jack (Video) on the rear of the
RL-DM1000 Modulator.
2. Connect the RCA cable from the audio source to the red/
white ‘INPUT’ audio jacks (AudioR, AudioL) on the
rear of the RL-DM1000 Modulator. Use red and white
jacks for dual input, or either one for single input.
3. Connect the RF output H from the RL-DM1000
to the modulator input on the RF Distribution Module
Alternatively, connect the RF output H to an existing
distribution system or directly to a television set.
4. Slide the Remote Power switch D to ‘ON’ if connecting
the Modulator to a RL-RF380 Video Hub.
5. Connect IR emitters RL-IR700/800 to the outputs C
on the rear of the RL-DM1000 Modulator. Place the
other end within 25mm of the IR receiver on the AV
source (depending on environmental conditions).
6. Connect the supplied 12V DC Switch Mode power pack
to the power input F .
A
A
A
B
C
D
E
F
G
H
I
INPUT
Video Input
Video Input Level
Video Mode
Audio Input
Audio Input Level
Input Connectors
Input Impedance
OUTPUT
Frenquency Range
Output Level
Output Impedance
Channel Bandwidth
Output Level Adjustment
MER
Connector Type
MODULATION
Video Resolution
Video Compression
Audio Compression
LCN
Carrier
Guard Intervals
Code Rate
Constellations
GENERAL
Power Supply
Consumption
Languages
Dimensions
Weight
CVBS
0.7-1.4 V (pp)
PAL / NTSC
Stereo
0.4 - 4.8 V (pp)
Video (RCA) - Audio (RCA)
75
Ʊ
177.5 - 816.5 MHz
85 dB V
75
6,7,8 MHz
15 dB typ.
30 dB typ.
“F” female
μ
Ʊ
PAL 720x576 @ 25fps
MPEG2 MP@ML
MPEG1 Layer ll
Yes
2K/8K
1/4, 1/8, 1/16, 1/32
1/2, 2/3, 3/4, 5/6, 7/8
16 QAM / 64 QAM
12 VDC 3-AMP
1100 MA
English
300mm x 200mm x 47mm
1.660kg
Technical Specifications
OK
DigiMOD INSTALLATION MANUAL
