Regency Ultimate U39 Owners & Installation Manual Download

Page: 1 / 48

WARNING:
If the information in these instructions are not followed exactly,
a fi re or explosion may result causing property damage,
personal injury or loss of life.

FOR YOUR SAFETY
Do not store or use gasoline or other fl ammable vapors and
liquids in the vicinity of this or any other appliance.

Installation and service must be performed by a qualifi ed
installer, service agency or the gas supplier.

FOR YOUR SAFETY
What to do if you smell gas:



Do not try to light any appliance



Do not touch any electrical switch:
do not use any phone in your
building.



Immediately call your gas supplier
from a neighbour's phone. Follow
the gas supplier's instructions.



If you cannot reach your gas
supplier, call the fi re department.

FPI FIREPLACE PRODUCTS INTERNATIONAL LTD. 6988 Venture St., Delta, BC Canada, V4G 1H4

918-531c

MODELS:

U39-NG1 Natural Gas

U39-LP1 Propane

ULTIMATE U39

Direct Vent Freestanding Gas Stove

04/05/11

Owners &

Installation Manual

www.regency-fi re.com

Tested by:

Installer: Please complete the details on the back cover

and leave this manual with the homeowner.

Homeowner: Please keep these instructions for future reference.

Summary of Contents for Ultimate U39

















































Search results

Summary of Contents for Ultimate U39

Reviews:

Related manuals for Ultimate U39

Brands by name

Popular brands

Regency Ultimate U39, Owners & Installation Manual

Search results

Summary of Contents for Ultimate U39

Reviews:

Related manuals for Ultimate U39

Brands by name

Popular brands