Regency P33-LP10 Owners & Installation Manual Download

Page: 1 / 52

FPI FIREPLACE PRODUCTS INTERNATIONAL LTD. 6988 Venture St., Delta, BC Canada, V4G 1H4

919-392

MODELS: P33-NG10 Natural Gas P33-LP10 Propane

12.16.14

Tested by:

Installer

: Please complete the details on the back cover

and leave this manual with the homeowner.

Homeowner:

Please keep these instructions for future reference.

www.regency-fire.com

Owners &

Installation Manual

P33-10 Zero Clearance

Direct Vent Gas Fireplace

- Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other

appliance.

- WHAT TO DO IF YOU SMELL GAS
•

Do not try to light any appliance.

• Do not touch any electrical switch: do not use any phone in your building.

Leave the building immediately.

• Immediately call your gas supplier from a neighbour's phone. Follow the gas supplier's

instructions.

• If you cannot reach you gas supplier, call the fire department.

- Installation and service must be performed by a qualified installer, service agency or the gas supplier.

WARNING
FIRE OR EXPLOSION HAZARD

Failure to follow safety warnings exactly could result in serious
injury, death, or property damage.

Summary of Contents for P33-LP10





















































Search results

Summary of Contents for P33-LP10

Reviews:

Related manuals for P33-LP10

Brands by name

Popular brands

Regency P33-LP10, Owners & Installation Manual

Search results

Summary of Contents for P33-LP10

Reviews:

Related manuals for P33-LP10

Brands by name

Popular brands