background image

21 March 2019

Freestanding Gas Stove

FOR YOUR SAFETY

What to do if you smell gas:

 

Do not try to light any appli-

ance

  Do not touch any electri-

cal switch: do not use any 

phone in your building.

  Immediately call your gas 

supplier from a neighbour's 

phone. Follow the gas sup-

plier's instructions.

  If you  cannot reach your 

gas  supplier,  call  the  fire 

department.

WARNING:  

Improper installation, adjustment, altera-

tion, service or maintenance can cause 

injury or property damage. Refer to this 

manual. For assistance or additional in-

formation consult an authorized installer, 

service agency or the gas supplier.
FOR YOUR SAFETY

Do not store or use gasoline or other flam

-

mable vapours and liquids in the vicinity of 

this or any other appliance.
Installation and service must be performed 

by an authorized installer, service agency or 

the gas supplier.

PLEASE KEEP THESE INSTRUCTIONS 

FOR FUTURE REFERENCE

Owners &
Installation

 

Man

ual

918-534h

Models: F38NG2-BRA

 F38LPG2-BRA 

LISTINGS AND CODE APPROVALS

These gas appliances have been tested in ac-
cordance with AS4553, NZS 5262 and have been 
certified by the Australian Gas Association for 
installation and operation as described in these 
Installation and Operating Instructions.

Your unit should be serviced annually by an 
authorised service person.

Summary of Contents for F38LPG2-BRA

































Reviews: