Regency Fireplace Products FireGenie FG39-LPG Owners & Installation Download

Page: 1 / 36

05/26/06

FOR YOUR SAFETY

What to do if you smell gas:

Do not try to light any appli-

ance

Do not touch any electrical

switch: do not use any

phone in your building.

Immediately call your gas

supplier from a neighbour's

phone. Follow the gas sup-

plier's instructions.

If you cannot reach your

gas supplier, call the fire

department.

WARNING:

Improper installation, adjustment, altera-

tion, service or maintenance can cause

injury or property damage. Refer to this

manual. For assistance or additional infor-

mation consult an authorized installer, serv-

ice agency or the gas supplier.
FOR YOUR SAFETY

Do not store or use gasoline or other flamma-

ble vapours and liquids in the vicinity of this

or any other appliance.
Installation and service must be performed

by an authorized installer, service agency or

the gas supplier.

PLEASE KEEP THESE INSTRUCTIONS

FOR FUTURE REFERENCE

Owners &

Installation

Manual

LISTINGS AND CODE APPROVALS

These gas appliances have been tested

in accordance with AS4553-2000, NZS

5262 and have been certified by the

Australian Gas Association for installation

and operation as described in these

Installation and Operating Instructions.

Your unit should be serviced

annually by an authorised service

person.

918-278a

Models: FG39-NG

FG39-LPG

Freestanding Gas Stove

All manuals and user guides at all-guides.com

all-guides.com

Summary of Contents for FireGenie FG39-LPG




































Search results

Summary of Contents for FireGenie FG39-LPG

Reviews:

Related manuals for FireGenie FG39-LPG

Brands by name

Popular brands

Regency Fireplace Products FireGenie FG39-LPG, Owners & Installation

Search results

Summary of Contents for FireGenie FG39-LPG

Reviews:

Related manuals for FireGenie FG39-LPG

Brands by name

Popular brands