RG-271 Manual Disassembly Jig
for back cover of smartphone
Application: Manually disassemble back cover or LCD and glass assembly of various kinds of
Smartphone.
Our previous disassembly jig RG-270 which used micrometer is rather slow for expert technician
who wants to quickly operate disassembly.
We changed turning part to disassemble into Knob screw with black head to turn instead of
micrometer for fast operation.
Lower plate of Previous disassembly jig is upgraded into bearing and black ball structure to clamp
suitable mobile phone. Because mobile phone has various kinds, when it is placed on lower plate,
it is normal for it to have some space but it cannot be away from lower frame.
If you try to use strong double sided sticky tape and plastic plate, please place the phone lower
and push upper plate to downward to meet suction cup onto surface of phone without leaking.
Core Manipulation:
Before using this RG-271 disassembly jig, you need to use heating machine to weaken double
sided sticky tape inside phone, we recommend our RG-202 and there are simply below references.
Use RG202 dryer oven to heat mobile phone. RG-202 is separately purchased, it has WARM
function to maintain a certain temperature by forced hot air circulation.
To avoid some defects, you can set target temperature of RG-202 again like 70 degrees for 5
minutes instead of 80 degrees for 5 minutes
