1. Do not use reel at higher pressures or temperatures than listed on
the back of this bulletin.
2. Remove all spring tension before beginning dissassembly process.
SAFETY
INSTALLATION:
A flexible hose connection must be used between the hose reel inlet and the source of supply to prevent possible
misalignment and binding.
LUBRICATION:
Hose reel spring and bearings are factory lubricated and require no further lubrication.
REPLACING HOSE:
1. Wind spool flange clockwise-facing swivel-until spring is tight.
2. Back off three turns and latch.
3. Insert hose through roller guide.
4. Connect hose fitting to swivel joint and secure hose with clamps.
ADJUSTMENTS:
To adjust spring tension, add or remove wraps of hose from the spool, one wrap at a time until desired tension is
obtained.
REPAIRS:
Extensive repairs should be performed only by an authorized serviceman or factory to avoid damage which may
void your warranty. Remove all spring tension before beginning disassembly process.
7800 OLB21
Operating Instructions
Series 7000 Spring Driven Hose Reels
Clean Air Hose Reel Model Number:
Reelcraft Industries, Inc. • 2842 E Business Hwy 30, Columbia City, IN 46725
Ph: 800-444-3134 / 260-248-8188 • Fax: 800-444-4587 / 260-248-2605
Customer Service: 855-634-9109 • [email protected] • www.reelcraft.com
Form# 951-698 Rev: 4/2017
MOUNTING:
The hose reel is equipped with a universal mounting bracket so that it can be mounted on the floor, wall or ceiling;
whichever place is convenient. The hose guide arm can be moved to the position desired by removing the nuts fas-
tening the guide bracket to the reel base. Shift the guide arm bracket so the hose comes off the reel at the desired
position and replace the nuts. A 180° wall mount bracket (600626) or 340° pivot base (600608) are also available
consult manufacturer.
Dimensions
A
20 1/4”
B
19 3/4”
C
7 13/16”
D
3 7/8”
E
7”
